Tyco/Central Model A / 76A / AA / A-1 flat fire sprinkler cover plate in WHITE.
Cover fits discontinued Tyco & Central fire sprinklers.
Model fits the following Tyco/Central fire sprinklers:
A, 76A, AA & A-1
Tyco/Central Model A fire sprinkler cover plate is available online in one temperature:
135° F, 57° C
Fire sprinkler cover plate listings:
When a cover plate reaches a specified temperature the solder holding the decorative exterior of the cover plate to its frame melts and the two separate. The temperature of the cover plate should be at a minimum 20° F cooler than the sprinkler head itself ensuring adequate separation time prior to sprinkler activation.
Fire Sprinkler Helpful Tips:
Tip 1: When replacing cover plates it is important to purchase replacements from the same manufacturer as the fire sprinkler. Each manufacturer's plate is a little different in size, color, etc. Manufacturer and temperature of a cover plate is printed on the base of the plate requiring removal to inspect. Most cover plates are either twist off or pull off.
Tip 2: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.