2 1/2" (63.5 mm) Rigid Grooved Coupling
|GGRC250||2 1/2" (63.5 mm)||Ferritic Ductile Cast Iron (ASTM A536 Grade 65-45-12) with EPDM Rubber Gasket||Paint Orange|
|Pipe Outside Diameter||Working Pressure||Bolt Size||Dimensions|
|2.875" (73 mm)||500 PSI (3.45 MPa)||M10x55||3.937" (100 mm) Outside Diameter x 5.433" (138 mm) Maximum Width x 1.732" (44 mm) Thick|
|Thermafit Industries Part Number||Availability|
|XGQT001073||Usually Ships Within 48 Hours|
2 1/2" (63.5 mm) Rigid Grooved Coupling forms a water-tight seal between two grooved pipes in fire sprinkler systems, standpipe systems, plumbing, HVAC, and water-based systems. Pipes joined by rigid grooved couplings behave like flanged or welded pipe, but can be installed significantly faster.
This UL and FM-approved 2 1/2" (63.5 mm) Rigid Grooved Coupling features a ductile iron body conforming to ASTM A536 Grade 65-45-12. The gasket is made from EPDM synthetic rubber, recognized as the most water-resistant rubber on the market today. Two pairs of carbon steel M10x55 nuts and bolts facilitate quick installation.
2 1/2" (63.5 mm) Rigid Grooved Coupling features built-in teeth that firmly grasp the pipe ends, facilitating straight pipe lays over short and long distances. Rigid couplings allow less than one degree of deviation from a straight line (angular deflection. This coupling offers a maximum working pressure of 500 PSI (3.4 KPa) depending on pipe diameter and thickness.
- 0: 3.937" (100 mm)
- H: 5.433" (138 mm)
- L: 1.732" (44 mm)