2 1/2" (63.5 mm) Pressure Restricting Hose Angle Valve - UL & FM Approved!
- Buy 10 for $161.45 each and save 5%
- Buy 50 for $152.96 each and save 10%
- Buy 100 for $144.46 each and save 15%
|Part Number||Construction||Pressure Tested To||Listings|
|250HVAPRFXM||Cast Brass||300 PSI (2070 KPa)||UL, ULC, & FM|
|Inlet||Outlet||Height (Open)||Width (Pivot to Outlet Tip)|
|Female NPT (FNPT)||Male National Standard Thread (MNST)||11" (279 mm)||3 3/16" (81 mm)|
|Standard usually ships within 48 hours||Standard usually ships within 48 hours|
2 1/2" (63.5 mm) Pressure Restricting Hose Angle Valve, used with rack hose assemblies or as a fire department outlet connection, features one 2 1/2" (63.5 mm) Female NPT (FNPT) inlet and one 2 1/2" (63.5 mm) Male National Standard Thread (MNST) outlet. This UL-listed and FM-approved valve is made from durable, lightweight brass and includes a forgeline bonnet and seat assembly with a red handwheel.
Each Cast Brass hose angle valve has a rated pressure of 300 PSI (2070 KPa). This valve is 11" (279 mm) tall when fully opened and 3 3/16" (81 mm) wide from inlet center to outlet tip. This pressure-restricting valve is designed for use with Class I and Class III fire protection systems where pressure on a hose rack assembly is between 90 PSI and 175 PSI. Flow and pressure are controlled using an adjustable flow restricter at the handwheel. For details, view the installation and operation instructions in the technical documents section.
For other thread sizes and types, click here to view our full selection of hose angle valves or contact us to place a special order by filling out our contact form or calling us at +1 (888) 361-6662.Technical Documents