2 1/2" Rubber Covered Fire Hose 250 PSI | 100 feet (30.48 m)
|Part Number||Hose Length||Inside Diameter||Coupling Size|
|250RC250L100B||100' (30.48 m)||2 1/2" (63.5 mm)||2 1/2" (63.5 mm)|
|Coupling Thread||Coupling Types||Hose Exterior||Pressure|
|National Standard Threads (NST/NH) or National Pipe Straight Hose Threads (NPSH/IPT)||Aluminum Rocker Lug Couplings, Brass Rocker Lug Couplings, or Brass Pin Lug Couplings||Choice of Rubber-Covered Red or Rubber-Covered Yellow||250 PSI Working, 500 PSI Tested|
|FM-approved||Ships directly from factory - usually 5-10 business days|
100' (30.48 m) of 2 1/2" (63.5 mm) Rubber-Covered Fire Hose minimizes friction loss to maintain pressure at the nozzle even when running long lines, making it perfect for industrial firefighting, moving water to fire sprinkler and standpipe systems, cleaning parking lots, and construction site wash down. This hose requires no drying, making it a maintenance-free industrial fire hose.
Choose from three coupling styles, two coupling thread types, and one of two colors for this rubber-covered lay-flat hose. 100' (30.48 m) of 2 1/2" (63.5 mm) Rubber-Covered Fire Hose provides the length of two 50 foot hoses without the extra couplings, lowering weight and making the hose less likely to snag. Greases, oils, seawater, and most chemicals have no effect on the performance of the hose. The synthetic nitrile rubber covering resists damage from fuels, chemicals, and abrasion. This covering also extends the hose's service life by defending against mold, mildew, and other contaminants. These full-flow hoses wipe clean and pack flat for simple cleaning and storage. This hose is FM-approved and comes with Superior Fire Hose's ten year warranty, and exceeds both UL and FM standards for abrasion and wear resistance.
Fire hoses usually ship out in 5-10 days but large orders may take longer. High quantity discounts apply. Please contact us with large order inquiries so we can provide a custom quote, either by filling out our contact form or calling us at +1 (888) 361-6662.
Choose from three coupling types for this Rubber-covered Fire Hose:
- Aluminum Rocker Lug Couplings
- Brass Rocker Lug Couplings
- Brass Pin Lug Couplings
Aluminum couplings are about one-third the weight of brass and almost twice as strong. Brass, while heavier, offers superior abrasion resistance. Pin-lug hose couplings, available only in brass, can be hand-tightened or secured with a spanner wrench, but may snag when pulled over rough surfaces. Rectangular rocker-lug couplings are beveled to help them pass over obstructions and are available in aluminum or brass.
This 250 PSI fire hose is available with two 2 1/2" (63.5 mm) coupling thread types:
- National Standard Threads (NST/NH)
- National Pipe Straight Hose Threads (NPSH/IPT)
National Standard Thread, or National Hose Thread, is the most widely-adopted thread size in the United States. National Pipe Straight Hose is used with discharge hose, low-pressure suction applications, and in other applications for water-based systems.
The rubber cover for this 100' (30.48 m) 250 PSI Fire Hose is available in two (2) colors: