2" (50.8 mm) CPVC Slip Cap
|SKU||Nominal Diameter||Design||Width (Outside)|
|TCPVCCA6||2" (50.8 mm)||Slip Cap||2 3/16"|
|Depth (Outside)||Material||Working Pressure||Temperature Range|
|2 27/32"||Chlorinated Polyvinyl Chloride (CPVC)||175 PSI at 150F (65C)||35F to 150F (2C to 65C)|
|Listings||Thermafit Industries Part Number||Availability|
|UL-Listed and FM-Approved. UL listed for Light Hazard Occupancies (NFPA 13) and Residential & Home Fire Sprinkler Systems (NFPA 13D, NFPA 13R)||CPCAP-2||Usually Ships Within 48 Hours|
2" CPVC Slip Cap is a corrosion and heat-resistant CPVC sprinkler pipe fitting. This CPVC cap forms a water-tight seal at the end of a 2" (50.8 mm) pipe run.
Each 2" CPVC Slip Cap is made in the USA by Thermafit Industries, Inc., a California-based manufacturer of plumbing and fire sprinkler pipe fittings. This cap has a working pressure rating of 175 PSI at 150F (65C) and is suitable for installation in NFPA 13, NFPA 13D, and NFPA 13R systems where allowed by state and local law.
2" CPVC Slip Cap is intended for use in light hazard NFPA 13 occupancies, residential NFPA 13R occupancies, and home fire sprinkler systems in accordance with NFPA 13D. This FM-approved product is UL-listed for use in wet-pipe automatic fire sprinkler systems in combination with UL-listed CPVC products.
2" CPVC Slip Cap is backed by Thermafit's ten-year warranty from the date of shipment. To find Thermafit-approved CPVC glue, click here. Consult Thermafit's installation manual for minimum curing times, a full list of compatible adhesives, and friction loss allowances. Not suitable for outdoor installation.