4" (101.6 mm) Wafer Butterfly Valve with Tamper Switch - UL & FM Approved!
- Buy 10 for $165.25 each and save 5%
- Buy 25 for $156.56 each and save 10%
- Buy 50 for $147.86 each and save 15%
|Part Number||Inlet||Outlet||Working Pressure|
|400WBFV||4" (101.6 mm)||4" (101.6 mm)||300 PSI (20.7 BAR)|
|32F (0C) to 176F (80C)||Ductile Cast Iron||Red Fusion Bonded Epoxy||EPDM-Coated Carbon Steel|
|NBR O-ring||UL, FM||Usually ships within 24 hours|
4" (101.6 mm) Wafer Butterfly Valve with Tamper Switch is designed to be seated between two pipe flanges for precision water flow control. With a rated temperature of 32F (0C) to 176F (80C), this valve is suitable for indoor or outdoor use in water-based systems, including as a control valve in fire protection systems.
This 4" (101.6 mm) Wafer Butterfly Valve has a working pressure of 300 PSI (20.7 BAR). The polymer-coated ductile iron body and EPDM-rubber lined disc resist corrosion and mechanical damage. The handwheel assembly delivers a slow open and slow close, forming a leak-tight seal between the disc and NBR rubber O-ring.
A fitted tamper switch allows the 4" (101.6 mm) Wafer Butterfly Valve to activate a local alarm bell or horn when the valve comes to a partial or complete close. The bright-yellow position indicator offers an at-a-glance indication of the valve's position.
Dual supervisory switches and wiring make it easy to connect the 4" (101.6 mm) Wafer Butterfly Valve to a fire control panel. Designed to install quickly with a roll-grooved body. When closed, this valve allows for immediate replacement of the down-flow end of the pipe, eliminating the need to drain the entire system during repairs or improvements.
UL Listed and FM-approved.
|Valve Pipe Connection Type||Wafer|
|Valve Size||4" (101.6 mm)|