6" (152.4 mm) Rigid Grooved Coupling
- Buy 25 for $15.95 each and save 5%
- Buy 50 for $15.11 each and save 10%
- Buy 100 for $14.27 each and save 15%
|GGRC600||6" (152.4 mm)||Ferritic Ductile Cast Iron (ASTM A536 Grade 65-45-12) with EPDM Rubber Gasket||Paint Orange|
|Pipe Outside Diameter||Working Pressure||Bolt Size||Dimensions|
|6.625" (168.3 mm)||400 PSI (2.75 MPa)||M12x75||7.815" (198.5 mm) Outside Diameter x 9.803" (249 mm) Maximum Width x 1.929" (49 mm) Thick|
|Thermafit Industries Part Number||Availability|
|XGQT001168||Usually Ships Within 48 Hours|
6" (152.4 mm) Rigid Grooved Coupling forms a water-tight seal between two grooved pipes in fire sprinkler systems, standpipe systems, plumbing, HVAC, and water-based systems. Pipes joined by rigid grooved couplings behave like flanged or welded pipe, but can be installed significantly faster.
This UL and FM-approved 6" (152.4 mm) Rigid Grooved Coupling features a ductile iron body conforming to ASTM A536 Grade 65-45-12. The gasket is made from EPDM synthetic rubber, recognized as the most water-resistant rubber on the market today. Two pairs of carbon steel M12x75 nuts and bolts facilitate quick installation.
6" (152.4 mm) Rigid Grooved Coupling features built-in teeth that firmly grasp the pipe ends, facilitating straight pipe lays over short and long distances. Rigid couplings allow less than one degree of deviation from a straight line (angular deflection. This coupling offers a maximum working pressure of 500 PSI (3.4 KPa) depending on pipe diameter and thickness.
- 0: 7.815" (198.5 mm)
- H: 9.803" (249 mm)
- L: 1.929" (49 mm)