Bleeder Valve for Pressure Test Caps | 1/4" (6.35 mm) NPT | Double Valve

SKU
403DBVB
Part of a complete gauge cap assembly, this Test Cap Bleeder Valve includes two brass ball valves for bleeding or reading pressure during static pressure tests of fire hose and fire hydrants. Sized for use with 1/4" (6.35 mm) NPT pressure gauges. Installs to a female NPT outlet.
$41.95
SKUControl MechanismValve MaterialValve Working Pressure
403DBVB Two 1/4" (6.35 mm) NPT Ball Valves Brass 700 PSI
InletBleeder PortGauge PortAvailability
1/4" (6.35 mm) Male NPT (MNPT) 1/4" (6.35 mm) Female NPT (FNPT) 1/4" (6.35 mm) Female NPT (FNPT) Usually Ships Within 48 Hours

Product Description

Test Cap Bleeder Valve attaches to 1/4" (6.35 mm) female National Pipe Thread (NPT) outlets, releasing trapped air or debris from water-based systems. Designed for use with a test cap, this bleeder includes two ball valves for complete control over the distribution of pressure, preventing damage to the pressure gauge.

This Test Cap Bleeder Valve directs water to one of two 1/4" female NPT (FNPT) outlets: the bleeder port or the gauge port. Bleeder valves are an important part of a complete cap gauge assembly for static pressure tests of fire hoses, fire hydrants, and other water-based systems.

To conduct static pressure tests using this Test Cap Bleeder Valve, connect it, along with an appropriate gauge and test cap, to the hydrant or another outlet. With the bleeder ball valve open, begin flowing water. After purging air and debris, close the bleeder ball valve and open the valve leading to the pressure gauge. When testing concludes, protect your gauge against pressure surges by re-opening the bleeder valve before shutting off the supply of water.

Write Your Own Review
You're reviewing:Bleeder Valve for Pressure Test Caps | 1/4" (6.35 mm) NPT | Double Valve
Your Rating