EPS10-1 Alarm Pressure Switch by System Sensor - UL & FM Approved!
- Buy 2 for $74.05 each and save 5%
- Buy 5 for $70.16 each and save 10%
- Buy 10 for $66.26 each and save 15%
|Part Number||Pressure Connection||Maximum Operating Pressure||Maximum Adjustment Pressure Range|
|ELPS101||1/2" (6.35 mm) Male NPT (MNPT) Glass-Reinforced Nylon||300 PSI||4 to 20 PSI|
|Dimensions||Service Use||Enclosure Rating||Warranty|
|5.12" H x 3.325" W x 4.250" L (13.0 cm x 8.4 cm x 10.8 cm)||NFPA 13, NFPA 13D, NFPA 13R, NFPA 72||Rated UL 4x, NEMA 4 for indoor or outdoor use||3 Years|
|Usually ships within 48 hours||UL, ULC, FM, LPCB, CA Fire Marshall, VdS|
System Sensor's EPS10-1 Pressure Switch is designed to indicate discharge in water-based systems, including wet, dry, deluge, and pre-action automatic fire sprinkler systems. Featuring a weatherproof NEMA 4-rated enclosure and approvals from UL, ULC, FM, MEA, and California's Office of the State Fire Marshal, this durable Single-Switch Alarm Pressure Switch is suitable for indoor or outdoor use.
System Sensor's EPS10-1 Pressure Switch can be side-mounted or installed in the upright or horizontal position using the 1/2" (6.35 mm) NPT pressure connection. The reinforced diaphragm resists pressure spikes and features a sensitivity adjustment wheel for adjustable actuation pressures between 4 and 20 PSI.
Each alarm pressure switch includes tamper-resistant screws, a security wrench, and an SPDT switch. System Sensor's EPS10-1 Pressure Switch is factory set to trigger local alarms or a fire alarm control panel at pressures between 4 PSI and 8 PSI on rising or falling pressure.
|Switch Contact Ratings||10.0 A, 1/2 HP @ 125/250 VAC. 2.5 A @ 6/12/24 VDC|
|Cover Tamper Switch||UL Models: Optional P/N 546-8000. ULC Models: Factory Installed.|
|Shipping Weight||1.2 lbs (.54 kg)|
|Service Use||NFPA 13, NFPA 13D, NFPA 13R, NFPA 72|