This site uses cookies to offer you a better experience, analyze site traffic, and personalize the site. By continuing to use this site or by clicking Accept, you consent to the use of cookies in accordance with our privacy policy. Learn more.
EPS10-2 Alarm Pressure Switch by System Sensor - UL & FM Approved!
SKU
ELPS102
System Sensor's EPS10-2 Pressure Switch sends an electrical signal when water discharges in plumbing and fire sprinkler systems. With adjustable sensitivity, a reinforced diagram, and a 1/2" (6.35 mm) NPT connection.
$90.95
- Buy 2 for $86.40 each and save 5%
- Buy 5 for $81.86 each and save 10%
- Buy 10 for $77.31 each and save 15%
| Part Number | Mounting | Maximum Operating Pressure | Maximum Adjustment Pressure Range |
|---|---|---|---|
| ELPS102 | 1/2" (6.35 mm) Male NPT (MNPT) Glass-Reinforced Nylon | 300 PSI | 4 to 20 PSI |
| Dimensions | Service Use | Enclosure Rating | Warranty |
|---|---|---|---|
| 5.12" H x 3.325" W x 4.250" L (13.0 cm x 8.4 cm x 10.8 cm) | NFPA 13, NFPA 13D, NFPA 13R, NFPA 72 | Rated UL 4x, NEMA 4 for indoor or outdoor use | 3 Years |
| Availability | Listings |
|---|---|
| Usually ships within 48 hours | UL, ULC, FM, LPCB, CA Fire Marshall, VdS |
Product Description
System Sensor's EPS10-2 Pressure Switch is designed to indicate discharge in water-based systems, including wet, dry, deluge, and pre-action automatic fire sprinkler systems. Featuring a weatherproof NEMA 4-rated enclosure and approvals from UL, ULC, FM, MEA, and California's Office of the State Fire Marshal, this durable Two-Switch Alarm Pressure Switch is suitable for indoor or outdoor use.
System Sensor's EPS10-2 Pressure Switch can be side-mounted or installed in the upright or horizontal position using the 1/2" (6.35 mm) NPT pressure connection. The reinforced diaphragm resists pressure spikes and features a sensitivity adjustment wheel for adjustable actuation pressures between 4 and 20 PSI.
Each alarm pressure switch includes tamper-resistant screws, a security wrench, and two SPDT switches. System Sensor's EPS10-2 Pressure Switch is factory set to trigger local alarms or a fire alarm control panel at pressures between 4 PSI and 8 PSI on rising or falling pressure.
Additional Specifications
| Specifications | |
|---|---|
| Switch Contact Ratings | 10.0 A, 1/2 HP @ 125/250 VAC. 2.5 A @ 6/12/24 VDC |
| Cover Tamper Switch | UL Models: Optional P/N 546-8000. ULC Models: Factory Installed. |
| Shipping Weight | 1.2 lbs (.54 kg) |
| Service Use | NFPA 13, NFPA 13D, NFPA 13R, NFPA 72 |
Technical Documents
Click here to view the data sheet for this System Sensor's EPS10-2 Pressure Switch .
Write Your Own Review