Open End Sprinkler Wrench | Reliable W2
- Buy 5 for $48.71 each and save 8%
- Buy 25 for $45.01 each and save 15%
- Buy 50 for $39.71 each and save 25%
|Part Number||Finish / Color||Sprinkler Models|
Reliable Model W2 open end fire sprinkler wrench is designed to speed installation or removal of Reliable fire sprinklers. This unique wrench is designed specifically for Reliable fire sprinkler frames and provides the flexibility to engage the fire sprinkler from various angles. Fits 1/2" & 3/4" sprinklers.
Fits Sprinkler Models:
- F1, F1FR. F156, F1FR56, F1RES, G & GFR Pend, Up & HSW, F1, F1FR, F156, F1FR56, G VSW, KFR56, KFR-CCS, Attic
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads is measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.