Need a replacement fire sprinkler system part? Our trained staff will help you find the right part, the first time. Call us at 888-361-6662.

Pipe Hole Cover Plate - Plastic | 5″ Pipes (IPS) | 5-1/2″ Holes | 8-1/2" OD| Chrome

SKU
PWP500CH
This plastic pipe hole cover plate conceals oversized holes around 5″ IPS pipes. Covers holes approximately 5-1/2" (140 mm) in size and installs easily with a twist-to-open design.
$4.99
SKU Finish Construction
PWP500CH Chrome Plastic
Outside Diameter Inside Diameter Depth
8-1/2″ (217 mm) 5″ IPS – 5-1/2″ (140 mm) Actual 3/16″ (4.8 mm)
Availability
Usually Ships Within 48 Hours

5″ IPS Plastic Pipe Hole Cover Plate (Chrome)

Plastic pipe hole cover plates conceal gaps between pipes and the surfaces they pass through. This chrome trim ring fits over a 5″ IPS (iron pipe size) pipe and will cover a hole measuring approximately 5-1/2″ (140 mm).

This 5″ IPS (iron pipe size) pipe plate works in new installations or retrofit applications. To add this chrome plate during a new installation, simply slide the plate over one end of the pipe. Then, press it against the wall, ceiling, or floor.

For retrofit applications, split the pipe hole cover plate by bending it back and forth at the seam. After that, gently twist the plate open and place it on the pipe. The plate will return to its original shape.

How should I use this 5″ IPS (iron pipe size) pipe hole cover plate?

Pipe hole cover plates provide an obvious cosmetic advantage, concealing any evidence of jagged holes or oversized gaps around the pipe. They also offer a sleek, clean appearance that’s easy on the eyes.

But according to the 2018 International Building Code (IBC) and International Plumbing Code (IPC), plastic wall cover plates are not approved materials to use on a fire-rated wall. Do not use this 5″ IPS (iron pipe size) floor and ceiling plate to seal penetrations in fire-rated partitions.

Will this floor & ceiling plate work with my piping and walls?

Pipe hole cover plates can conceal unsightly holes anywhere that a pipe penetrates a wall or ceiling. This chrome-finished 5″ IPS (iron pipe size) plate fits pipes with iron pipe sizes of 5″. IPS is a nominal measurement and does not reflect the exact dimensions of a pipe.

Exact dimensions for this chrome-finished, 5″ floor and ceiling plate are:

  • Inside diameter: 5-1/2″ (140 mm)
  • Outside diameter: 8-1/2″ (217 mm)
  • Depth: 3/16″ (4.8 mm)

Other sizes are available in both white and chrome finishes, such as:

Write Your Own Review
You're reviewing:Pipe Hole Cover Plate - Plastic | 5″ Pipes (IPS) | 5-1/2″ Holes | 8-1/2" OD| Chrome
Your Rating