CPVC Cap | Slip | 2 in.

SKU:
TCPVCCA6

No reviews yet Write a Review
$2.89
2" (50.8 mm) CPVC Slip Cap
2" (50.8 mm) CPVC Slip Cap
Inlet View of 2" (50.8 mm) CPVC Slip Cap
Top View of 2" (50.8 mm) CPVC Slip Cap

  • Buy 8 - 63 and get 5% off
  • Buy 64 or above and get 15% off

Frequently Bought Together:

2" (50.8 mm) CPVC Slip Cap
Inc. Tax
Ex. Tax

Overview

2 in. CPVC Slip Cap is a corrosion and heat-resistant CPVC sprinkler pipe fitting. This CPVC cap forms a water-tight seal at the end of a 2 in. (50.8 mm) pipe run.

Each 2 in. CPVC Slip Cap is made in the USA by Thermafit Industries, Inc., a California-based manufacturer of plumbing and fire sprinkler pipe fittings. This cap has a working pressure rating of 175 PSI at 150F (65C) and is suitable for installation in NFPA 13, NFPA 13D, and NFPA 13R systems where allowed by state and local law.

2 in. CPVC Slip Cap is intended for use in light hazard NFPA 13 occupancies, residential NFPA 13R occupancies, and home fire sprinkler systems in accordance with NFPA 13D. This FM-approved product is UL-listed for use in wet-pipe automatic fire sprinkler systems in combination with UL-listed CPVC products.

2 in. CPVC Slip Cap is backed by Thermafit's ten-year warranty from the date of shipment.

Specifications

Material:
CPVC
Pipe Fitting Type:
Cap
UL Listed/FM Approved:
No

Data & Resources

Reviews

No reviews yet

Customers Also Viewed

1 1/4 in. CPVC Slip Cap Inside of 1-1/4 in. CPVC Slip Cap

CPVC Cap | Slip | 1-1/4 in.

SKU : TCPVCCA4

$1.99
1 1/4" CPVC Slip Cap closes off CPVC pipes used in NFPA 13, NFPA 13D, and NFPA 13R fire sprinkler systems. This UL-listed and FM-approved fitting is made with heat-resistant thermoplastic CPVC. Made...
1 1/2" (38.1 mm) CPVC Slip Cap 1 1/2" (38.1 mm) CPVC Slip Cap

CPVC Cap | Slip | 1-1/2 in.

SKU : TCPVCCA5

$1.91
1-1/2 in. CPVC Slip Cap is a corrosion and heat-resistant CPVC sprinkler pipe fitting. This CPVC cap forms a water-tight seal at the end of a 1-1/2 in. (38.1 mm) pipe run. Each 1-1/2 in. CPVC Slip...
CPVC Glue | One-Step Cement | 1 Pint CPVC Glue | One-Step Cement | 1 Pint

CPVC Glue | One-Step Cement | 1 Pint

SKU : TFI1PCPGLUE

$17.99
CPVC Glue forms a water-tight seal between CPVC pipes, fittings, couplings, elbows, and other components used in the construction of fire sprinkler systems. This pint of one-step solvent cement...
6" (152.4 mm) Cap | Grooved End Fittings 6" (152.4 mm) Cap | Grooved End Fittings

Grooved End Cap | 6 in.

SKU : GGCAP600

$30.78
6 in. Grooved End Cap provides closure to a run of grooved pipe. Designed for use with grooved mechanical couplings, these caps are suitable for use in fire sprinkler systems, standpipe systems,...
1" (25.4 mm) CPVC Slip Cap 1" (25.4 mm) CPVC Slip Cap

CPVC Cap | Slip | 1 in.

SKU : TCPVCCA3

$0.92
1 in. CPVC Slip Cap is a corrosion and heat-resistant CPVC sprinkler pipe fitting. This CPVC cap forms a water-tight seal at the end of a 1 in. (25.4 mm) pipe run. Each 1 in. CPVC Slip Cap is made in...
EPS10-2 Alarm Pressure Switch | System Sensor EPS10-2 Alarm Pressure Switch | System Sensor

Alarm Pressure Switch | EPS10-2 | Safe Signal

SKU : ELPS102

$160.00
Safe Signal's EPS10-2 Pressure Switch is designed to indicate discharge in water-based systems, including wet, dry, deluge, and pre-action automatic fire sprinkler systems. Featuring a weatherproof...
3" (76.2 mm) Cap | Grooved End Fittings 3" (76.2 mm) Cap | Grooved End Fittings

Grooved End Cap | 3 in.

SKU : GGCAP300

$6.45
3 in. Grooved End Cap provides closure to a run of grooved pipe. Designed for use with grooved mechanical couplings, these caps are suitable for use in fire sprinkler systems, standpipe systems,...