Globe Pipe Hanger Swivel Ring | 1-1/2 in.

SKU:
SWV150
Manufacturer Part Number:
300-214

No reviews yet Write a Review
$0.75
Globe Pipe Hanger Swivel Ring  | 1 1/2" Swivel Ring 300-214
Globe Pipe Hanger Swivel Ring  | 1 1/2" Swivel Ring 300-214
Globe Pipe Hanger Swivel Ring  | 1 1/2" Swivel Ring 300-214
Side of Globe Pipe Hanger Swivel Ring  | 1 1/2" Swivel Ring 300-214

  • Buy 100 - 999 and get 5% off
  • Buy 1000 or above and get 15% off

Frequently Bought Together:

Globe Pipe Hanger Swivel Ring  | 1 1/2" Swivel Ring 300-214
Inc. Tax
Ex. Tax

Overview

1-1/2 in. (38.1 mm) Globe Pipe Hanger Swivel Ring is designed for the suspension of non-insulated stationary pipelines in fire sprinkler systems, standpipes, plumbing, and other piping applications. This steel hanger is designed for 1-1/2 in. (38.1 mm) pipes and has a maximum recommended load of 400 Pounds

Each 1-1/2 in. (38.1 mm) Swivel Ring features a zinc electroplate nut that allows for vertical adjustment after installation. In accordance with NFPA 13 9.1.1.2 (2016), hangers for fire protection piping must be rated for 5 times the weight of water-filled pipe plus 250 pounds at each support. This swivel ring may be installed prior to the erection of piping.

Dimensions for this 1-1/2 in. (38.1 mm) Pipe Hanger Ring are:

  • A - 3/8 in.
  • B - 3 in.
  • C - 2 1/4 in.
  • D - 4 in.
  • E - 1 1/8 in.

Dimensional Sizes

Specifications

Reviews

No reviews yet

Customers Also Viewed

1 1/4 in. CPVC Slip Cap Inside of 1-1/4 in. CPVC Slip Cap

CPVC Cap | Slip | 1-1/4 in.

SKU : TCPVCCA4

$1.99
1 1/4" CPVC Slip Cap closes off CPVC pipes used in NFPA 13, NFPA 13D, and NFPA 13R fire sprinkler systems. This UL-listed and FM-approved fitting is made with heat-resistant thermoplastic CPVC. Made...
Black Iron Pipe Nipple | 1 in. (25 mm) NPT | Close | 1CBNIP Black Iron Pipe Nipple | 1 in. (25 mm) NPT | Close | 1CBNIP

Black Iron Pipe Nipple | 1 in. NPT | Close

SKU : 100BNIPC

$1.25
1 in. (25mm) NPT x Close Black Iron Pipe Nipple, commonly used with fire sprinkler pipes, connects two female pipes using two male-threaded pipe ends. Made by Anvil International, a New...
Six (6) Fire Sprinkler Head Cabinet Six (6) Fire Sprinkler Head Cabinet

Fire Sprinkler Head Cabinet | 3 Spare Heads

SKU : 03HCAB

$12.99
Three (3) Fire Sprinkler Head Cabinet contains knockouts and shelves to fit three (3) spare fire sprinklers in accordance with NFPA 13 and NFPA 25. With durable rolled steel and a powder-coated red...
Riser Clamp for 4 Inch Pipe | Globe Pipe Hanger Riser Clamp for 4 Inch Pipe | Globe Pipe Hanger

Globe Pipe Hanger Riser Clamp | 4 in.

SKU : RC400

$9.25
This Riser Clamp is designed to support and stabilize vertical runs of 4 in. (101.6 mm) pipe. These Riser Clamps from Globe Pipe Hanger are made of steel with two bolts to tighten the clamp around...