Recessed Fire Sprinkler Wrench | Victaulic V27 | 1/2"
- Buy 10 for $103.50 each and save 5%
- Buy 50 for $98.06 each and save 10%
- Buy 100 for $92.61 each and save 15%
|SKU||Construction||Sprinkler Models||Wrench Model|
|RSW50||Black Steel V27-1||V27||V27-1|
|1/2" (12.7 mm)||Usually ships within 48 hours|
Victaulic Wrench for 1/2" (12.7 mm) V27 Recessed Fire Sprinklers is designed to speed installation or removal of Victaulic model V27 fire sprinklers. Available in painted black, this wrench is made to engage with Victaulic's hex-shaped fire sprinkler frames, which are designed to provide extra flexibility in installing or removing fire sprinklers from various angles.
Sprinkler Identification Numbers (SINs) for compatible Victaulic products include: V2707, & V2708.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.