Recessed Fire Sprinkler Wrench | Victaulic V34 | 3/4"
- Buy 10 for $96.85 each and save 5%
- Buy 50 for $91.76 each and save 10%
- Buy 100 for $86.66 each and save 15%
|SKU||Construction||Sprinkler Models||Wrench Model|
|RSW75||Black Steel V34||V34||V34|
|1/2" (12.7 mm)||Usually ships within 48 hours|
Victaulic Wrench for 3/4" (19.1 mm) V34 Recessed Fire Sprinklers is designed to speed installation or removal of Victaulic model V34 fire sprinklers. Available in painted black, this wrench is made to engage with Victaulic's hex-shaped fire sprinkler frames, which are designed to provide extra flexibility in installing or removing fire sprinklers from various angles.
Sprinkler Identification Numbers (SINs) for compatible Victaulic products include: V3405, V3406, V3409, V3410, V3411, & V3412.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.