Socket Wrench for Concealed Fire Sprinklers | Reliable Model FC

SKU
RLFCWR
Reliable Socket Wrench for Model FC Concealed Fire Sprinklers fits many sprinklers from models RFC 30, RFC 43, RFC 49, G5. This wrench fits 1/2-inch ratchets to speed sprinkler installation and removal.
$175.95
  • Buy 5 for $161.87 each and save 8%
  • Buy 25 for $149.56 each and save 15%
  • Buy 50 for $131.96 each and save 25%
Part Number Finish / Color Sprinkler Models
RLFCWR Cast See Below


Reliable Model FC concealed fire sprinkler wrench is designed to speed installation or removal of Reliable concealed fire sprinklers. This unique wrench is designed specifically for Reliable fire sprinkler frames and provides the flexibility to engage the fire sprinkler from various angles. Fits 1/2" ratchets.


Fits sprinkler models:

- RFC 30

- RFC 43

- RFC 49

- G5


Fire Sprinkler Wrench Helpful Tips:

Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.

Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads is measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.

Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.

Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.

Technical Documents

Click here to view the data sheet for this Reliable Socket Wrench for Model FC Concealed Fire Sprinklers.

Write Your Own Review
You're reviewing:Socket Wrench for Concealed Fire Sprinklers | Reliable Model FC
Your Rating