Viking Socket Wrench for QR & EC Concealed Fire Sprinklers | 14047W/B
- Buy 5 for $79.99 each and save 8%
- Buy 25 for $73.91 each and save 15%
- Buy 50 for $65.21 each and save 25%
|SKU||Finish||Sprinkler Models||Viking Part Number|
|VKCSW||Black||QR & EC||14047W/B|
|Usually ships within 48 hours||Usually ships within 48 hours|
Viking Socket Wrench for QR & EC Concealed Fire Sprinklers is designed to speed installation or removal of Viking model QR & EC fire sprinklers. Available in painted black, this wrench is made to engage with Viking fire sprinkler frames and provides the flexibility to engage with the sprinkler from various angles. Fits 1/2-inch ratchets.
Sprinkler Identification Numbers (SINs) for compatible Victaulic products include: VK461, VK462, VK463, VK464, VK465, VK632, & VK634.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.Technical Documents