Looking for the right fire sprinkler escutcheon for your sprinkler? Check out this FREE guide.

Viking Open-Ended Iron Wrench | XT1 Fire Sprinklers with Head Guards | 22927MR

SKU
VKOESW0
Only Viking’s 22927MR wrench can quickly install any Viking XT1 fire sprinkler with a Model XG head guard. This specialty wrench includes slots that slide over the bottom of the guard, and can install more than ten 1/2″ and 3/4″ NPT heads (listed in this description).
$69.95
SKU Construction Compatible Sprinkler Types
VKOESW0 Red-Finished Steel Viking XT1 Fire Sprinklers with Model XG Head Guards (See List Below)
Viking Part Number Availability
22927MR Usually Ships Within 48 Hours

Viking Open-Ended Iron Wrench for XT1 Fire Sprinklers with Model XG Head Guards (22927MR)

This open-ended sprinkler wrench features a single head that expedites the installation or removal of Viking XT1 fire sprinklers with Model XG head guards attached. This red, ductile-iron wrench includes slots that slide over the bottom of the guard to installs more than ten 1/2″ and 3/4″ NPT heads.

The Viking Open-Ended Sprinkler Wrench makes it easy to engage with these heads from multiple angles. Compatible sprinkler identification numbers (SINs) for the 22927MR wrench include:

  • VK1001
  • VK1021
  • VK2001
  • VK2002
  • VK2021
  • VK2022
  • VK3001
  • VK3021
  • VK3501
  • VK3502
  • VK3521
  • VK3522

Why use Viking’s Model XG fire sprinkler head guards (and this wrench)?

All fire sprinklers rely on small plugs to prevent the flow of water until the sprinkler activates. The plugs on Viking XT1 fire sprinklers feature a small hinge designed to prevent malfunctions by directing the plug out of water’s path.

Headguards not made by Viking may press against that hinge, impairing the sprinkler head. But Model XG head guards leave space for that hinge. The 22927MR Sprinkler Guard Wrench can install sprinklers with these guards attached, using small slots to reach around XG guards and grip wrench flats on the sprinkler’s frame.

This wrench is suitable for use during the installation and removal of the 1/2″ and 3/4″ XT1 fire sprinklers—and ideal for storage in the spare fire sprinkler cabinets required by NFPA 13.

Write Your Own Review
You're reviewing:Viking Open-Ended Iron Wrench | XT1 Fire Sprinklers with Head Guards | 22927MR
Your Rating