Reliable™ Model XL Institutional Pendent QR Fire Sprinkler Head
Sprinkler Identification Number (SIN): R1314
This Institutional Pendent sprinkler features a Chrome finish and a 165°F (73°C) activation temperature.
This Reliable™ Model XL Flush Institutional Pendent Fire Sprinkler is a quick response, standard coverage sprinkler, activating at 165°F with a 5.6K K-Factor, and is rated for light and ordinary hazard occupancies. Each pendent head features a heat-sensitive fusible link assembly, standard 1/2 in. NPT threads, and a CDA Alloy frame with Brass deflector.
This is a quick response, standard coverage, institutional sprinkler with a maximum working water pressure of 175 PSI. The Reliable™ Institutional Sprinkler features a tamper-resistant design, making it a safe and effective choice for use with concealed piping in various institutional mental health occupancies, correctional facilities, or other settings where flush, tamper-resistant sprinklers may be required.
Using a heat-activated fusible link assembly, this automatic fire sprinkler opens when ambient temperatures reach 165°F, effectively containing the spread of fire. The R1314 is installed flush using the corresponding flush escutcheon, leaving exposed only a small portion of the fusible link assembly to ensure the timely activation of the fire sprinkler. Refer to the manufacturer data sheet for installation instructions with the approved Reliable™ escutcheon(s).
Reliable™ Flush Institutional Fire Sprinkler (R1314) Sprinkler Head Listings and Approvals
Each institutional sprinkler is made by Reliable™, a global leader in fire protection manufacturing for nearly 100 years. When installed properly, this R1314 maintains the following listings and approvals: cULus, LPCB, CE, UKCA.
Refer to the datasheet for listings and approvals in specific temperatures and/or applications.
The Reliable™ Institutional Pendent Sprinkler R1314 is designed for NFPA 25. Apply the listed areas of coverage and minimum water supply requirements as shown in the datasheet. This pendent sprinkler head has a maximum working pressure of 175 PSI (12.1 BAR) and connects to wet fire protection systems.
Reliable™ R1314 Institutional Fire Sprinkler Head Listings and Approvals
During installation be aware that over tightening will cause permanent damage to the 1/2 in. NPT threads and/or the fire sprinklers themselves. Use the manufacturer approved installation wrench and tighten to a maximum torque of 14 ft-lb (19 N-m). Refer to the data sheet for additional installation and storage information.
The listed R1314 accessories include the approved Reliable™ ZX-Pendent Wrench (PN. WZXP) and the approved Reliable™ Escutcheon(s). Commonly purchased with fire sprinkler head cabinets and sprinkler shut off tools. These products are available in the “Frequently bought together” products section at the top of this product page.
