Hose Angle Valve, Pressure Restricting | 2-1/2 in. | F NPT x M NST | Brass

SKU:
250HVAPRFXM

No reviews yet Write a Review
$179.99
2 1/2" Pressure Restricting Hose Angle Valve
2 1/2" Pressure Restricting Hose Angle Valve
2 1/2" Pressure Restricting Hose Angle Valve | UL & FM Listed
2 1/2" Pressure Restricting Hose Angle Valve
2 1/2" Pressure Restricting Hose Angle Valve | Threaded Connections

  • Buy 8 - 19 and get 5% off
  • Buy 20 or above and get 10% off

Frequently Bought Together:

2 1/2" Pressure Restricting Hose Angle Valve
Inc. Tax
Ex. Tax

Overview

2-1/2 in. (63.5 mm) Pressure Restricting Hose Angle Valve, used with rack hose assemblies or as a fire department outlet connection, features one 2-1/2 in. (63.5 mm) Female NPT (FNPT) inlet and one 2-1/2 in. (63.5 mm) Male National Standard Thread (MNST) outlet. This UL-listed and FM-approved valve is made from durable, lightweight brass and includes a forgeline bonnet and seat assembly with a red handwheel.

Each Cast Brass hose angle valve has a rated pressure of 300 PSI (2070 KPa). This valve is 11 in. (279 mm) tall when fully opened and 3 3/16 in. (81 mm) wide from inlet center to outlet tip. This pressure-restricting valve is designed for use with Class I and Class III fire protection systems where pressure on a hose rack assembly is between 90 PSI and 175 PSI. Flow and pressure are controlled using an adjustable flow restrictor at the handwheel. For details, view the installation and operation instructions in the technical documents section.

<

Specifications

Thread Type:
F NPT x M NST

Data & Resources

Reviews

No reviews yet

Customers Also Viewed

Angle Valve | 2" Angle Valve Angle Valve | 2" Angle Valve

Angle Valve | 2 in.

SKU : 200AVA

$74.25
Trim or drain with this 2 in. (50.8 mm) Angle Valve NPT constructed from durable cast brass. This valve is ready for service in water-based systems, including fire sprinkler systems and standpipes...
2 1/2" Plastic Cap and Chain for Hose Valves 2 1/2" Plastic Cap and Chain for Hose Valves

Cap and Chain | NST | Plastic | 2-1/2 in.

SKU : CAP250NSTP

$6.99
2-1/2 in. (63.5 mm) Plastic Cap & Chain protects hose angle valves, hydrants, or other 2-1/2 in. NST-threaded male outlets from dirt, dust, and debris. Made from durable red plastic, this 2-1/2 in...
Brass Cap and Chain | 2 1/2" Brass Cap and Chain | 2 1/2"

Cap and Chain | NST | Brass | 2-1/2 in.

SKU : CAP250NST

$14.99
2-1/2 in. (63.5 mm) Brass Cap & Chain protects hose angle valves, hydrants, or other 2-1/2 in. NST-threaded male outlets from dirt, dust, and debris. Made from durable cast brass, this 2-1/2 in. cap...