Grooved Riser Check Valve Trim Kits
This Grooved Riser Check Valve Trim Kit contains everything needed to add draining and monitoring capability to riser check valves. Air/Water pressure gauges display supply and system-side pressure for inspection, testing and monitoring of wet-pipe and pre-action fire protection systems. These Valve Trim Kits can be used to meet NFPA 13 requirements (7.1.1.2) for pressure gauges to be installed above and below check valves.
Grooved Riser Check Valve Trim Kit Options, Sizing, and Additional Info
This Grooved Riser Check Valve Trim Kit is available in two options for different size ranges of check valves:
2-1/2 and 3 in. Check Valves
4 to 8 in. Check Valves
Each Trim Kit features all necessary trim, including:
1 x Angle Valve (1-1/4 in. or 2 in.)
1 x Angle Valve Nipple (1-1/4 in. x Close or 2 in. x Close)
2 x Nipples (1/4 in.)
2 x Air/Water Pressure Gauges
2 x Plugs (1/4 in.)
2 x Three-Way Valves (1/4 in.)
2 x Bushings (1/2 in. x 1/4 in.)
QRFS SKU: |
75-LN-VTK-2428 |
Manufacturer Part Number: |
650-275-00280 |
Manufacturer: |
Lansdale |
Model: |
Grooved Riser Check Valve Trim Kit |
Size: |
4 in. to 8 in. |
Application: |
Wet-Pipe Systems |
Maximum Working Water Pressure: |
350 PSI |
Material: |
Brass Trim Valves, Steel Plugs |
Angle Valve: |
1 x 2 in. |
Angle Valve Nipple: |
1 x 2 in. x Close |
Other Nipples: |
2 x 1/4 in. |
Gauges: |
2 x Air/Water |
Plugs: |
2 x 1/4 in. |
Three-Way Valve: |
2 x 1/4 in. |
Bushings: |
2 x 1/2 in. x 1/4 in. |
Sourced Location: |
USA |
Weight: |
7 lb. (3.17 kg) |
