Victaulic Open-End Wrench for 3/4 in. (19.1 mm) V34 Fire Sprinklers is designed to speed installation or removal of Victaulic model V34 & V36 fire sprinklers. Available in painted black, this wrench is made to engage with Victaulic's hex-shaped fire sprinkler frames, which are designed to provide extra flexibility in installing or removing fire sprinklers from various angles.
Sprinkler Identification Numbers (SINs) for compatible Victaulic products include: V3401, V3402, V3403, V3404, V3405, V3406, V3423, &V3424.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2 in.) or three-quarter (3/4 in.) inch. The outer diameter of a (1/2 in.) sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4 in.) sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2 in.) sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.