Overview
Tyco RFII concealed fire sprinkler wrench is designed to speed installation or removal of Tyco model RFII fire sprinklers. Available in painted black, this unique hex-head wrench is designed specifically for Tyco fire sprinkler frames and provides the flexibility to engage the fire sprinkler from various angles. Fits models DS-C, DS-ECC, RFll.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2 in.) or three-quarter (3/4 in.) inch. The outer diameter of a (1/2 in.) sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4 in.) sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2 in.) sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.
Specifications
Size: |
1/2 in. |
Size Detail: |
;Fits 1/2 in. Sprinklers" |
SIN: |
DS-C, DS-ECC, RFll |
Model: |
W-1118 |
Manufacturer: |
Tyco |