Tyco™ TY3332 HSW Sprinkler | QR / SR | 5.6K | White | 135F | 50-376-4-135

Tyco™ Model TY-FRB EC Horizontal Sidewall Fire Sprinkler Head

Sprinkler Identification Number (SIN): TY3332

This EC HSW sprinkler features a Signal White Polyester finish and a 135°F (57°C) temperature.

This Tyco™ Model TY-FRB EC Horizontal Sidewall Sprinkler is a quick response, extended coverage sprinkler, activating at 135°F (57°C) with a 5.6 K-Factor. Each sidewall head features a heat-sensitive 3 mm glass bulb, Standard 1/2 in. NPT threads, and a Brass frame with Copper deflector.

This is a quick response, extended coverage, horizontal sidewall sprinkler with a maximum working water pressure of 175 PSI. Using a heat-activated glass bulb assembly, this automatic fire sprinkler opens when ambient temperatures reach 135°F (57°C), effectively containing the spread of fire.

The TY3332 is installed as a horizontal sidewall using Tyco™’s approved Style 10 or Style 20 recessed escutcheons. Refer to the manufacturer data sheet for installation instructions with the approved Tyco™ escutcheon(s).

Tyco™ Horizontal Sidewall Fire Sprinkler (TY3332) Sprinkler Head Listings and Approvals

Each sprinkler head is made by Tyco™, a global leader in fire protection manufacturing for nearly 100 years. When installed properly, this TY3332 maintains the following listings and approvals: UL, cUL, FM, NYC Approved.

Refer to the datasheet for listings and approvals in specific temperatures and/or applications.

The Tyco™ EC Horizontal Sidewall Sprinkler TY3332 is designed for NFPA 13 applications. Apply the listed areas of coverage and minimum water supply requirements as shown in the datasheet. This horizontal sidewall sprinkler head has a maximum working pressure of 175 PSI (12.1 BAR) and connects to wet pipe fire protection systems.

Tyco™ TY3332 Automatic Fire Sprinkler Installation and Accessories

During installation be aware that over tightening will cause permanent damage to the 1/2 in. NPT threads and/or the fire sprinklers themselves. Use the manufacturer approved installation wrench (W-Type 6 or W-Type 7) and tighten to a maximum torque of 14 ft-lb (19 N-m). Refer to the data sheet for additional installation and storage information.