CPVC Elbow Adapter 1-1/4 in. x 1/2 in. | Spears® FlameGuard® | 4207-166

SKU:
51-SP-EA-170800
Manufacturer Part Number:
4207-166

No reviews yet Write a Review
$11.75
Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Hero Image | QRFS
Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Markings Image | QRFS
Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Sides Image | QRFS
Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Threads Image | QRFS
Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Family Image | QRFS

  • Buy 10 - 49 and get 2.5% off
  • Buy 50 or above and get 7.5% off

Frequently Bought Together:

Spears FlameGuard Elbow Adapter 1-1/4 in. x 1/2 in. Hero Image | QRFS
Inc. Tax
Ex. Tax

Overview

Spears FlameGuard CPVC 1-1/4 in. x 1/2 in. Slip x FNPT Elbow Adapter

Constructed of corrosion-resistant CPVC – Chlorinated Polyvinyl Chloride - thermoplastic for use only with Spears FlameGuard fire sprinkler products, this Slip x FNPT Elbow Adapter, sometimes called a CPVC reducer elbow or CPVC threaded elbow, features a 90-degree bend with one 1-1/4 in. connection and one 1/2 in. connection to be used in fire sprinkler piping systems to allow for proper water flow.

This CPVC fitting is a 1-1/4 in. x 1/2 in. slip x FNPT 90-degree elbow adapter and can be used when installing a new fire sprinkler pipe system or as a CPVC repair fitting. This elbow adapter is available in the following sizes:

3/4 in. x 1/2 in.

1 in. x 1/2 in., 1 in. x 3/4 in.

1-1/4 in. x 1/2 in.

You can select your preferred size from the “Options” section at the top of this product page.

The listed accessories for this product include other Spears FlameGuard CPVC fire sprinkler pipes and fittings, and Spears FlameGuard Low VOC cement.

Spears is a leader in the CPVC fire sprinkler pipe market. Their CPVC pipe fittings provide a clean, consistent connection for optimal water flow when used with Spears FlameGuard pipe.

Spears FlameGuard CPVC 1-1/4 in. x 1/2 in. Slip x FNPT Elbow Adapter Listings, Approvals, and Installation

Each Slip x FNPT Elbow Adapter is made in the USA by Spears, a California-based manufacturer of plumbing and fire sprinkler pipe fittings with over 50 years’ experience. This elbow has a working pressure rating of 175 PSI at 150F (65C). It is intended for use in light hazard NFPA 13 occupancies, residential NFPA 13R occupancies, and home fire sprinkler systems in accordance with NFPA 13D, when approved by the local Authority Having Jurisdiction. This product is UL, FM, and LPCB approved.

Spears FlameGuard CPVC fittings should only be used with Spears FlameGuard pipe and joined using Spears FlameGuard cement or approved no-cement fittings. Intermixing CPVC brands can void the manufacturer’s warranty or pose a serious fire hazard. Review the Spears Compatible Products List below or visit Spears website to ensure compatibility with other products, such as insulation, caulk, etc. Only install in accordance with the Spears Installation Guide linked below.

Spears FlameGuard CPVC 1-1/4 in. x 1/2 in. Slip x FNPT Elbow Adapter Warnings and Other Information

DO NOT expose Spears FlameGuard CPVC Fire Sprinkler Products to edible oils, esters, ketones, or petroleum-based products, such as cutting oils, packing oils, traditional pipe thread pastes or dopes, and some lubricants. Do not store or install CPVC products in direct contact with plasticizer containing materials such as electrical tape or certain wire and cable insulations. Consult with the chemical manufacturer for compatibility with CPVC or Spears before use. Contact with incompatible chemicals could cause serious personal injury, property damage, and product damage.

Spears FlameGuard CPVC Fire Sprinkler Products should be stored indoors with a maximum storage temperature of 110° F (43° C). If storing outdoors, the products must be covered with a non-transparent material to prevent extended exposure to sunlight. Brief exposure to direct sunlight on the job site may result in color fade, but it will not affect the physical properties. Spears FlameGuard CPVC Fire Sprinkler Fittings should be stored indoors in their original containers to keep them free from dirt and to help reduce the possibility of damage.

Spears FlameGuard CPVC Fire Sprinkler Products must no­t be subjected to prolonged sunlight exposure. The use of pipe and fittings that have been damaged due to improper storage could cause serious personal injury, property damage, and product damage.

Spears FlameGuard are registered trademarks of the Spears Manufacturing Company. All rights reserved.

Specifications

QRFS SKU:
51-SP-EA-170800
Manufacturer Part Number:
4207-166
Manufacturer:
Spears
Brand:
FlameGuard
Chemical Composition:
Chlorinated Polyvinyl Chloride (CPVC)
Fitting:
Elbow Adapter
Finish:
Orange
Size:
1-1/4 in. x 1/2 in.
Size Detail:
1-1/4 in. x 1/2 in. Socket x FNPT
UL Listed:
Yes
FM Approved:
Yes
Rated Working Water Pressure:
175 PSI
Rated Working Temperature:
150F
Length:
1.94 in. (49.28 mm)
Width:
1.53 in. (38.86 mm)
Height:
1.69 in. (42.93 mm)
Weight:
0.33 lb. (0.15 kg)
Box/Pack Quantity:
10

Reviews

No reviews yet

Customers Also Viewed