Ductile Iron Top Beam Clamps in Black or Galvanized Finish
These Top Beam Clamps are UL Listed and FM Approved for securing pipe on top beams in pipe systems, including fire protection. These clamps provide sturdy clamping to bar joists and flanges and provide for vertical hanger rod installation offset from the edge of the beam flange. They are constructed of a ductile iron body and are available in a black or galvanized finish. Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom of the flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joists or flange does not exceed 5/8 in. These Top Beam Clamps are available in four different size and finish combinations: 3/8 in.-16 in Black or Galvanized & 1/2 in.-16 in Black or Galvanized.
Complies with Federal Specification WW-H-171-E (Type 19), ANSI/MSS SP-69 and MSS SP-58 (Type 18), UL Listed and FM Approved.
Manufacturer Part Number: |
500-400-00040 |
Manufacturer: |
Lansdale |
Product Type: |
Top Beam Clamp |
Material: |
Ductile Iron |
Size: |
1/2 in.-16 |
Rod Size: |
1/2 in. |
Load lbs.: |
950 Top/750 Bottom |
Torque: |
60 ft./lbs. |
UL Listed: |
Yes |
FM Approved: |
Yes |
Finish Detail: |
Black |
Sourced Location: |
USA |
Length: |
2.13 in. (54.1 mm) |
Width: |
1.06 in. (26.92 mm) |
Height: |
1.75 in. (44.45 mm) |
Weight: |
0.35 lb. (0.16 kg) |
Box/Pack Quantity: |
50 |
