Riser Clamp for 4" Pipe | Globe Pipe Hanger
- Buy 10 for $4.70 each and save 5%
- Buy 100 for $4.21 each and save 15%
- Buy 500 for $3.47 each and save 30%
|Part Number||Pipe Size||Material||Overall Width|
|RC400||4" (101.6 mm)||Carbon Steel||12 1/2"|
|Maximum Recommended Load||Weight||Globe Part Number||Listings|
|390 lbs.||3.1 lbs. Each||500-140||UL, FM|
|Usually ships within 48 hours|
This Riser Clamp is designed to support and stabilize vertical runs of 4" (101.6 mm) pipe. These Riser Clamps from Globe Pipe Hanger are made of steel with two bolts to tighten the clamp around the pipe. Each clamp is UL-listed and FM-approved.
This 4" (4 inch / 10.16 cm) model complies with Federal Specification WW-H-17E (Type 8) and Manufacturers Standardization Society MSS-P-69 (Type 8). QRFS has thousands of Riser Clamps in stock. No job is too large or too small.
Pipe Size: 4 inches (4")
Overall Width (A): 12 1/2 inches (12.5")
B: 4 inches (4")