Globe Pipe Hanger Riser Clamp | 2-1/2 in.

SKU:
RC250

No reviews yet Write a Review
$7.50
Riser Clamp for 2.5 Inch Pipe | Globe Pipe Hanger
Riser Clamp for 2.5 Inch Pipe | Globe Pipe Hanger
Riser Clamp for 2.5 Inch Pipe | Globe Pipe Hanger
Width of Riser Clamp for 2.5 Inch Pipe | Globe Pipe Hanger
Riser Clamp for 2.5 Inch Pipe

  • Buy 25 - 249 and get 5% off
  • Buy 250 or above and get 10% off

Frequently Bought Together:

Riser Clamp for 2.5 Inch Pipe | Globe Pipe Hanger
Inc. Tax
Ex. Tax

Overview

This Riser Clamp is designed to support and stabilize vertical runs of 2-1/2 in. pipe. These Riser Clamps from Globe Pipe Hanger are made of steel with two bolts to tighten the clamp around the pipe. Each clamp is UL-listed and FM-approved.

This 2-1/2 in. (2.5 inch / 6.35 cm) riser clamp complies with Federal Specification WW-H-17E (Type 8) and Manufacturers Standardization Society MSS-P-69 (Type 8). QRFS has thousands of riser clamps in stock. No job is too large or too small.

Available up to 12 in. by special order. Please reach out to us using our fill out our contact form. or call us at +1 (888) 361-6662.

Dimensions

Pipe Size: 2 1/2 inches (2-1/2 in.)

Overall Width (A): 10 5/8 inches (10.625 in.)

B: 4 inches (4 in.)

Riser Clamp Dimensional

Specifications

Reviews

No reviews yet

Customers Also Viewed

Riser Clamp for 6 Inch Pipe | Globe Pipe Hanger Riser Clamp for 6 Inch Pipe | Globe Pipe Hanger

Globe Pipe Hanger Riser Clamp | 6 in.

SKU : RC600

$11.00
This Riser Clamp is designed to support and stabilize vertical runs of 6 in. (152.4 mm) pipe. These carbon-steel riser clamps from Globe Pipe Hanger feature two bolts used to tighten the clamp around...
3" (76.2 mm) Grooved Coupling | Rigid 3" (76.2 mm) Grooved Coupling | Rigid

Grooved Coupling | Rigid | Two Bolt | 3 in.

SKU : GGRC300

$9.99
3 in. (76.2 mm) Rigid Grooved Coupling forms a water-tight seal between two grooved pipes in fire sprinkler systems, standpipe systems, plumbing, HVAC, and water-based systems. Pipes joined by rigid...
Riser Clamp for 4 Inch Pipe | Globe Pipe Hanger Riser Clamp for 4 Inch Pipe | Globe Pipe Hanger

Globe Pipe Hanger Riser Clamp | 4 in.

SKU : RC400

$9.25
This Riser Clamp is designed to support and stabilize vertical runs of 4 in. (101.6 mm) pipe. These Riser Clamps from Globe Pipe Hanger are made of steel with two bolts to tighten the clamp around...
3" (76.2 mm) Drain Cap | 1" (25.4 mm) NPT Outlet | Grooved End Fittings 3" (76.2 mm) Drain Cap | 1" (25.4 mm) NPT Outlet | Grooved End Fittings

Grooved Drain Cap | 1 in. Outlet | 3 in.

SKU : GGDCP301

$26.23
3 in. Grooved Drain Cap with 1 in. NPT Outlet is an end cap designed to reduce 3 in. (76.2 mm) grooved pipe to a 1 in. (25.4 mm) threaded pipe. This rigid pipe fitting is designed for use with...