Test Cap for Faucets | 1/4 in. NPT Threaded Inlet | Brass | 3/4 in.

SKU:
TCAP075NST

No reviews yet Write a Review
$13.25
3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
Large Inlet Threads of 3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
Small Inlet Threads of 3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
Small Inlet of 3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
Large Inlet of 3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet

  • Buy 10 - 49 and get 5% off
  • Buy 50 or above and get 10% off

Frequently Bought Together:

3/4" (19.1 mm) NST Brass Test Cap with 1/4" (6.35 mm) NPT Gauge Inlet
Inc. Tax
Ex. Tax

Overview

3/4 in. (19.1 mm) NST Brass Test Cap with 1/4 in. (6.35 mm) NPT Gauge Inlet is designed for flow tests and static pressure tests at 3/4 in. (19.1 mm) spigots, sillcocks, faucets, garden hose outlets, and other threaded outlets. Machined from solid brass, this test cap can be paired with a gauge or used to flow water out of the 1/4 in. (6.35 mm) bleeder.

3/4 in. (19.05 mm) NST Brass Test Cap with 1/4 in. (6.35 mm) NPT gauge inlet is compatible with gauges in a range of sizes and pressures, including our line of air and water pressure gauges. Directly connecting a pressure gauge to the test cap is not recommended during static pressure tests. Bleeder valves (sold separately) can safely release excess pressure to prevent damage to gauges.

3/4 in. (19.05 mm) NST Brass Test Cap with 1/4 in. (6.35 mm) NPT gauge inlet is compatible with our full line of 1/4 in. (6.35 mm) bleeder valves designed for static pressure tests. Single-ball-valve bleeders allow users to direct flow to a pressure gauge or to a bleeder using only one ball valve, while double-ball-valve bleeders use two ball valves to control gauge and discharge outlets separately. Quick-disconnect bleeders feature Parker Hannafin's high-quality quick-disconnect fittings to protect pressure gauges against unnecessary wear during installation and removal.

Specifications

Reviews

No reviews yet

Customers Also Viewed

EPS10-1 Alarm Pressure Switch | System Sensor EPS10-1 Alarm Pressure Switch | System Sensor

Alarm Pressure Switch | EPS10-1 | Safe Signal

SKU : ELPS101

$160.00
Safe Signal's EPS10-1 Pressure Switch is designed to indicate discharge in water-based systems, including wet, dry, deluge, and pre-action automatic fire sprinkler systems. Featuring a weatherproof...
1% Full Scale Accuracy with a Stablized Dial 3.2" Dry Dial Stabilized - You Choose the Gauge Range!

Pressure Gauge | Dry Dial | 1% Accuracy | 3.2 in.

SKU : 203DDG

$59.25 - $89.25
3.2 in. Dry-Dial Pressure Gauge is designed and calibrated for water flow testing. This gauge delivers readings with 1% full-range accuracy on a stabilized, easy-to read dial with a knife-edge...