Looking for the right fire sprinkler escutcheon for your sprinkler? Check out this FREE guide.

Triple R HT-89A Hydrostatic Test Pump with Pressure Regulator | 300 PSI / 3.0 GPM | 1/2 HP Ball Bearing Motor

HT-89A Hydrostatic Test Pump delivers up to 300 PSI and 3.0 GPM with a 1/2 horsepower ball bearing motor. This light pump weighs only 35 pounds and includes a silicon-filled gauge and 10 feet of quick-disconnect hose. The HT-89A keeps system pressure in check with a built-in pressure regulator.
  • Buy 2 for $791.30 each and save 5%
  • Buy 5 for $749.66 each and save 10%
  • Buy 10 for $708.01 each and save 15%
Part NumberRated PressureRated FlowPressure Gauge
HT89A Up to 300 PSI Up to 3.0 GPM Silicone-Filled, 0 PSI to 600 PSI
WeightDischarge HoseContentsAvailability
35 lbs 10' (3 m) Outlet Hose with Quick Disconnect Fitting Pump, Pressure Gauge, Discharge Hose Usually Ships Within 24 Hours

Product Description

HT-89A Hydrostatic Test Pump provides up to 300 PSI of pressure and 3.0 GPM with a 1/2 HP motor. This pump has the power required for most NFPA hydrostatic tests on small and medium-sized buildings with pipe diameters below six inches. This pump features a pressure regulator designed to close off the water supply at a specific outlet pressure, preventing the buildup of excess system pressure.

This pump's 1/2 HP ball bearing motor has a service factor of 115%, allowing continuous operation at 0.575 horsepower without damaging the pump. The Triple R HT-89A also includes 10' (3 m) of discharge hose with quick-disconnect couplings that make it easy to demonstrate to fire officials that the system is successfully maintaining pressure.

This 3.0 GPM Hydrostatic Test Pump includes a silicon-filled pressure gauge, stabilizing the gauge needle for better performance and longer product life in pulsating or vibrating environments. This pump weighs in at only 35 pounds, making it a comparable, lightweight alternative to the Reed EHTP500, Reed EHTP500, and Rice's EL1 and EL1A model pumps.

Each 300 PSI Hydrostatic Test Pump is ideal for small and medium-scale fire safety applications, including fire sprinkler and standpipe acceptance and revision testing, as well as small-scale water transfers or vent-line filling in carpet cleaning, water damage restoration, and various plumbing applications. The swiveled inlet connection and included supply hose make connecting a water source easy from any angle.

Write Your Own Review
You're reviewing:Triple R HT-89A Hydrostatic Test Pump with Pressure Regulator | 300 PSI / 3.0 GPM | 1/2 HP Ball Bearing Motor
Your Rating