Preparing for a fire inspection? Avoid common citations using our FREE inspection checklist.

Tru-Test Hydrostatic Test Pump | 250 PSI / 2.2 GPM | 12V DC

100% of 100
Tru-Test Hydrostatic Test Pump 12 Volt DC. Battery-powered pump delivers up to 250 PSI & 2.2 GPM with lightweight, corrosion resistant brass piping for hydrostatic acceptance and revision testing, small-scale water transfers, and vent-line filling.
  • Buy 2 for $592.75 each and save 5%
  • Buy 5 for $561.56 each and save 10%
  • Buy 10 for $530.36 each and save 15%
Part NumberPower SourcePressureFlow
TT12V25' (7.62 m) Battery Cable - 12VDCUp to 250 PSIUp to 2.2 GPM
WeightInlet HoseOutlet HoseAdditional Contents
22 lbs5' (1.5 m) Inlet Hose10' (3 m) Outlet Hose with Quick Disconnect FittingLiquid Filled Gauge, In-Line Check Valve, Red Carrying Case
Usually ships within 24 hours

Product Description

Tru-Test Hydrostatic Test Pump (12 Volt DC) is a lightweight hydrostatic testing solution for standpipes, fire sprinklers, fire sprinkler system plumbing, and other water-based systems in a portable, durable metal case. With a 25' (7.62 m) battery cable, this electric pump delivers up to 250 PSI of pressure and up to 2.2 GPM when connected to a 12V battery (not included). Ideal for tests in buildings that do not currently have a functioning power source.

This Tru-Test Hydrostatic Test Pump includes a silicon-filled gauge, stabilizing the gauge needle for better performance and longer product life in pulsating or vibrating environments. Brass piping provides this pump with greater corrosion-resistance and lighter weight than pumps built with galvanized steel pipe, giving this kit a total weight of just 22 pounds.

This 12V Tru-Test Hydrostatic Test Pump is sufficient for small and medium-scale fire safety applications, including fire sprinkler and standpipe acceptance and revision testing, and can be used for small-scale water transfers or vent line filling in carpet cleaning, water-damage restoration, and other plumbing applications. The swiveled inlet connection and 5' (1.5 m) inlet hose make connecting a water source easy from any angle.

The built-in full-flow bypass system guarantees that the 12V Tru-Test Hydrostatic Test Pump pump stays within pressure limits. This pump also features an in-line check valve to prevents backflow to municipal or other water sources, a suction-side strainer that filters debris and minimizes flooding, and 10' (3 m) of outlet hose with quick-connect/quick-disconnect couplings.

Write Your Own Review
You're reviewing:Tru-Test Hydrostatic Test Pump | 250 PSI / 2.2 GPM | 12V DC
Your Rating