Viking™ Model H-1 Flush Ceiling Ring Fire Sprinkler Escutcheon
Manufacturer Part Number: 07626M/W
This Model H-1 Flush Ceiling Ring features a White finish and 3 in. Outer Diameter and is intended for use with Viking™'s Horizon Model Sprinkler Heads.
Viking™'s Model H-1 Flush Ceiling Rings are designed to fit seamlessly with your Model H-1 (SIN VK402) Sprinklers to provide a clean and low-profile appearance. This escutcheon comes in a White finish. With an outside diameter of 3" (76.2 mm), it effectively covers installation holes and enhances the appearance of the sprinkler head.
Viking™ escutcheons are ornamental plates used with frame-style pendent and sidewall sprinklers. The escutcheons are installed between the sprinklers and the ceiling or wall for a pleasing appearance. They are available with several finish options to meet design requirements.
Listings and Approvals
When combined with a listed sprinkler head, this flush escutcheon may carry listings from UL, FM and/or other organizations, depending on the sprinkler it is installed with. Refer to the specific sprinkler’s technical datasheet for up-to-date approvals.
Installation and Accessories
Detailed installation instructions for Model H-1 Flush Ceiling Ring can be found in the manufacturer datasheet (linked below). This is a Viking™ Flush Escutcheon and features a push on design.
Available Model H-1 Flush Ceiling Rings:
Viking™ Flush Ceiling Ring for Model H-1 Flush Sprinkler | White | 2-11/16 in. OD | Thread On | 06919BM/W
Viking™ Flush Ceiling Ring for Model H-1 Flush Sprinkler | Chrome | 2-11/16 in. OD | Thread On | 06919BF
Viking™ Flush Ceiling Ring for Model H-1 Flush Sprinkler | White | 3 in. OD | Push On | 07626M/W
Viking™ Flush Ceiling Ring for Model H-1 Flush Sprinkler | Chrome | 3 in. OD | Push On | 07626F
