Viking NP-3 Fire Sprinkler Escutcheon
This Viking NP-3 Seismic Sprinkler Escutcheon features an aesthetically pleasing white finish on steel, has an outer diameter of 5-1/8 in. and a 27/32 in. adjustment. This two-piece non-split escutcheon is available for Viking fire sprinklers with a 1/2 in. or 3/4 in. orifice and has a vertical adjustment up to 27/32 in. These Viking NP-3 escutcheons are Thread On design, meaning you simply screw into the sprinkler’s adapter to install.
The Viking NP-3 Recessed fire sprinkler escutcheon ring guarantees proper sprinkler head activation by covering the gap left by a hole saw when a fire sprinkler is installed. Keep your system compliant by using the listed fire sprinkler escutcheon for your sprinkler. Model NP-3 Recessed Escutcheons also meet IBC-ASCE/SEI 7 Codes for Seismic Areas C, D, and E.
Viking NP-3 Recessed Escutcheon Compatibility, Listings, and Other Information
When combined with a listed sprinkler head, this recessed escutcheon may carry listings from UL, FM and/or other organizations, depending on the sprinkler it is installed with. Refer to the specific sprinkler’s technical datasheet for specific approvals. Whether you’re installing a new fire sprinkler system or just need a fire sprinkler escutcheon replacement, be sure that it works with your model sprinkler!
This Viking NP-3 escutcheon is made of Steel and is available in Polished Chrome and White Polyester. These escutcheons are to be installed with manufacturer defined fire sprinkler heads with a 1/2 in. or 3/4 in. orifice. See list above to check for sprinkler head compatibility.
Viking recessed and adjustable escutcheons provide a low-profile decorative recessed sprinkler installation. These two-piece escutcheons allow installation and testing of the sprinklers prior to installing the ceiling or wall, and are made to allow for minor adjustments due to pipe or ceiling pitch. These escutcheons can be removed and reinstalled, allowing access above removable ceiling panels for servicing building equipment without shutting down the sprinkler system and removing the sprinkler.
This Sprinkler Escutcheon fits the following Viking sprinkler heads:
- VK1021
- VK2022
- VK3021
- VK3522
QRFS SKU: |
12-VK-NP3ST-WH50 |
Manufacturer Part Number: |
22068M/W |
Manufacturer: |
Viking |
Model: |
NP-3 |
Installation Type: |
Threaded |
Adjustment: |
27/32 in. |
Outer Diameter: |
5-1/8 in. |
Inner Diameter: |
2-1/8 in. |
Sprinkler Size: |
1/2 in. Sprinkler |
Finish: |
White |
Finish Detail: |
White Polyester |
Corrosion Resistant: |
Yes |
UL Listed: |
Yes |
FM Approved: |
No |
Length: |
5.13 in. (130.3 mm) |
Width: |
5.13 in. (130.3 mm) |
Height: |
1.19 in. (30.23 mm) |
Available Box/Pack Quantity: |
200 |
fmt_variance: |
27/32 in. Adjustment |
fmt_type: |
Threaded Seismic |