Tyco® TY9226 ESFR Sprinkler | Pendent | 25.2K | Brass | 165F | 58-441-1-165

Tyco ESFR-25 (TY9226) Pendent ESFR Fire Sprinkler Head

This Tyco ESFR-25 Brass Pendent Early Suppression Fast Response Fire Sprinkler features a fusible link activating at 165F (74C) with a 25.2 K-Factor, and 1 in. NPT threads. Each pendent head features a brass frame and bronze deflector. The manufacturer part number is 58-441-1-165 and the Sprinkler Identification Number (SIN) is TY9226.

The ESFR-25 Pendent Sprinklers are suppression mode sprinklers that are especially advantageous as a means of eliminating in-rack sprinklers when protecting high-piled storage. These sprinklers are primarily used for, but not limited to, protections of encapsulated or non-encapsulated common materials, cartoned and unexpanded plastics, uncartoned and expanded plastics, and some storage arrangements of rubber tires, roll paper, flammable liquids, aerosols, and automotive components. Using a heat-activated fusible link assembly, this automatic fire sprinkler opens when ambient temperatures reach 165F (74C), drenching the area surrounding a fire to keep it in its place of origin.

Tyco ESFR-25 (TY9226) Pendent Head ESFR Sprinkler Listings and Approvals

Each Tyco ESFR-25 sprinkler is made by Tyco, a global leader in fire-suppression products. This ESFR upright fire sprinkler head is UL and C-UL Listed, FM Approved, VdS Approved, NYC Approved (MEA 356-01-E), LPCB Certified (094b, 0071) and EAC Approved.

The TY9226 is an Early Suppression Fast Response sprinkler and is listed for use when installed in accordance with NFPA 13 requirements for wet pipe sprinkler systems and designed for use in high-piled storage areas. This pendent sprinkler head has a maximum working pressure of 175 PSI (12.1 BAR) FM and connects to wet piping systems.

Tyco ESFR Sprinkler Head ESFR-25 (TY9226) Installation and Other Information

During installation be aware that over tightening will cause permanent damage to the 1 in. NPT threads and/or the fire sprinklers themselves. Use the manufacturer approved installation wrench and tighten to a maximum torque of 14 ft-lb (19 N-m). Refer to the data sheet for additional storage and installation information.

This pendent sprinkler features a brass finish and a 165F (74C) temperature. It comes in a Natural Brass finish, and temperature options include 165F (74C) and 212F (100C). Finish and temperature combinations available in the “Options” section at the top of this product page.

TY7126 listed accessories include the W-Type 1 sprinkler wrench, manufacturer part number (56-872-1-025). Commonly purchased with fire sprinkler head cabinets and sprinkler shut off tools. These products are available in the “Frequently bought together” products section at the top of this product page.