QRFS.com is open and fulfilling orders. Read our Emergency Preparedness Guide.

Riser Clamp for 2 1/2" Pipe | Globe Pipe Hanger

Riser Clamp for 2 1/2" Pipe is made from carbon steel. Globe Pipe Hanger's riser clamps are UL & FM approved and compliant with federal specifications and manufacturers standardization society specifications. Available up to 12" by special order.
  • Buy 10 for $3.75 each and save 5%
  • Buy 100 for $3.36 each and save 15%
  • Buy 500 for $2.77 each and save 30%
Part NumberPipe SizeMaterialOverall Width
RC250 2 1/2" (63.5 mm) Carbon Steel 10 5/8"
Maximum Recommended LoadWeightGlobe Part NumberListings
810 lbs. 1.9 lbs. Each 500-124 UL, FM
Usually ships within 48 hours

Product Description

This Riser Clamp is designed to support and stabilize vertical runs of 2 1/2" pipe. These Riser Clamps from Globe Pipe Hanger are made of steel with two bolts to tighten the clamp around the pipe. Each clamp is UL-listed and FM-approved.

This 2 1/2" (2.5 inch / 6.35 cm) riser clamp complies with Federal Specification WW-H-17E (Type 8) and Manufacturers Standardization Society MSS-P-69 (Type 8). QRFS has thousands of riser clamps in stock. No job is too large or too small. 

Available up to 12" by special order. Please reach out to us using our contact form or call us at +1 (888) 361-6662.


Pipe Size: 2 1/2 inches (2.5")

Overall Width (A): 10 5/8 inches (10.625")

B: 4 inches (4")

Riser Clamp Dimensional

Write Your Own Review
You're reviewing:Riser Clamp for 2 1/2" Pipe | Globe Pipe Hanger
Your Rating