Safe Signal Supervisory Switch PSP1 Plug-In Special Purpose Tamper Switch
This Safe Signal PSP1 Supervisory Switch, also known as a Tamper Switch, is a Plug-In Special Purpose switch that is designed for applications where no other type of listed valve tamper switch can be installed. Typically, this switch monitors non-rising stem gate, ball, and angle valves.
This device is approved for Class A and B circuits, and employs an adjustable length supervisory cord which, when pulled out, closes a set of normally open contacts. A lockout feature prevents reinsertion of the cord until the cover is removed and the unit is reset. This switch features a NEMA 3 rated housing and water-resistant cord and can be installed indoors or outdoors. It features a 360-degree mounting design that provides greater installation flexibility.
This Special Purpose Supervisory Switch has a temperature range of -4-149F. It is NEMA 3R & UL Listed for use indoors and outdoors with an 8 ft. 2 wire 18-gauge waterproof cable. It has a contact rating of 6/12/24V AC/DC & is equipped with tamper-resistant cover screws to prevent unauthorized entry.
QRFS SKU: |
28-SF-SVS-PSP1 |
Manufacturer Part Number: |
PSP1 |
Manufacturer: |
Safe Signal |
Product Type: |
Supervisory Switch |
Model: |
PSP1 |
Pipe/Part Compatability: |
Plug-In Special Purpose |
Switch Contact Rating: |
6/12/24V AC/DC |
Enclosure Rating: |
Indoor/Outdoor |
UL Listed: |
Yes |
FM Approved: |
Yes |
Length: |
8.5 in. (215.9 mm) |
Width: |
3 in. (76.2 mm) |
Height: |
2.5 in. (63.5 mm) |
Weight: |
1.7 lb. (0.77 kg) |
Box/Pack Quantity: |
1 |
Sourced Location: |
USA |
