Viking XG Sprinkler Head Guard for Model(s) XT1 Fire Sprinklers
This Viking fire sprinkler head guard helps protect fire sprinklers from impact damage from a variety of causes in a variety of settings – flying balls in a gym, forklifts in a warehouse, or vandalism in an arena. The Model XG head guard can be installed during or after initial installation, but it is recommended to install the guard prior to installing the sprinklers themselves. See manufacturer datasheet for complete installation instructions. Made of a durable steel wire with a chrome finish, these guards, sometimes called fire sprinkler cages, protect from light to hard hits to prevent damage and/or accidental activation.
This specific head guard for use with Viking XT1 Upright/Pendent fire sprinklers.
The Viking XG headguard cULus Listed and/or FM Approved for use with Model XT1 fire sprinklers, including the following SINs (Sprinkler Identification Numbers) VK1001, VK1021, VK3001, VK3021, VK2002, VK2022, VK3502, VK3522, VK2001, VK2021, VK3501, VK3521
NOTE: The Model XG Sprinkler Guard is NOT designed to be used with sprinklers installed with recessed escutcheons.
Any place with a high risk for impact/damage to a protruding fire sprinkler is recommended to have a head guard. That typically includes hotels, schools, gyms, warehouses, or any place with low headroom or clearance.
QRFS SKU: |
14-VK-23930 |
Manufacturer Part Number: |
23930 |
Manufacturer: |
Viking |
Model: |
XG |
For Sprinkler Models: |
XT1 |
Head Type: |
Upright/Pendent |
Sprinkler Size: |
1/2 in. and 3/4 in. Sprinker |
Outer Diameter: |
2-15/16 in. |
Height: |
2-3/16 in. |
Corrosion Resistant: |
No |
UL Listed: |
Yes |
FM Approved: |
Yes |
Finish: |
Chrome |
Length: |
2.94 in. (74.68 mm) |
Width: |
2.94 in. (74.68 mm) |
Height: |
2.19 in. (55.63 mm) |
Weight: |
0.06 lb. (0.03 kg) |
Available Box/Pack Quantity: |
50 |
