Viking B-1 Sprinkler Head Guard & Shield for Frame Style Upright Fire Sprinklers
This Viking fire sprinkler head guard & shield helps protect fire sprinklers from impact damage from a variety of causes in a variety of settings – flying balls in a gym, forklifts in a warehouse, or vandalism in an arena. This B-1 sprinkler head guard must be installed after sprinkler installation, and is FM Approved for use with the following Sprinkler Identification Numbers (SINs):
VK100, VK108, VK200, VK300, VK350
See manufacturer datasheet for complete installation instructions. Made of a durable steel wire with a chrome finish, these guards, sometimes called fire sprinkler cages, protect from light to hard hits to prevent damage and/or accidental activation in dry fire sprinklers.
Any place with a high risk for impact/damage to a protruding fire sprinkler is recommended to have a head guard. That typically includes hotels, schools, gyms, warehouses, or any place with low headroom or clearance.
QRFS SKU: |
14-VK-05866A |
Manufacturer Part Number: |
05866A |
Manufacturer: |
Viking |
Model: |
B-1 |
For Sprinkler Models: |
Frame Style |
Head Type: |
Upright |
Sprinkler Size: |
1/2 in. and 3/4 in. Sprinker |
Outer Diameter: |
4-3/8 in. |
Height: |
2-1/4 in. |
UL Listed: |
No |
FM Approved: |
Yes |
Finish: |
Chrome |
Material: |
Steel |
Length: |
4.38 in. (111.25 mm) |
Width: |
4.38 in. (111.25 mm) |
Height: |
2.25 in. (57.15 mm) |
Weight: |
0.25 lb. (0.11 kg) |
Available Box/Pack Quantity: |
80 |
