Seismic Bracing

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Loos Seismic Bracing Zinc Sleeves for Orange Cable | Box of 100

    SKU : OR4SLV

    $79.95
    This pack of 5 one-way retrofit anchoring fittings secures Loos & Co. seismic bracing cables to an existing 3/8 in. (10 mm) fastener. With a 3/8 in. fastener mount and one cable mounts, each fastener allows contractors to secure Loos-brand cables with...
    Qty in Cart: 0
    Quantity:
    Price:
    $79.95
    Subtotal:
  • Seismic Bracing Cable | 770 lb. Load (Orange) | 250"≤ (76 m) Spool | Loos Seismic Bracing Seismic Bracing Cable | 770 lb. Load (Orange) | 250"≤ (76 m) Spool | Loos Seismic Bracing

    Loos Seismic Bracing Cable | 770 lb. Load (Orange) | 250 ft. Spool

    SKU : OR4CBL

    $199.95
    This 250 ft. spool of Loos & Co. seismic bracing cable can support loads up to 770 pounds, giving contractors a cost-effective way to satisfy NFPA 13€™s standards for earthquake-resistant hanging of fire sprinkler system piping. Seismic cable...
    Qty in Cart: 0
    Quantity:
    Price:
    $199.95
    Subtotal:
  • 3/8 in. (10 mm) Loos & Co. Low-Pry Fitting for Seismic Cable Bracing | Pack of 5 3/8 in. (10 mm) Loos & Co. Low-Pry Fitting for Seismic Cable Bracing | Pack of 5

    Loos & Co. Low-Pry Fitting for Seismic Cable Bracing | 3/8 in. | Pack of 5

    SKU : LPF38

    $74.95
    Use this pack of 5 low-pry anchoring fittings to secure Loos & Co. seismic bracing cables to a 3/8 in. (10 mm) fastener. With a 3/8 in. fastener mount, two cable slots, and an inspection hole, each fastener allows contractors to secure Loos-brand cables...
    Qty in Cart: 0
    Quantity:
    Price:
    $74.95
    Subtotal:
  • FELCO C9 Cable Cutter | Seismic Bracing Cable & Wire Up to 1/4 in. (25.4 mm) Thick FELCO C9 Cable Cutter | Seismic Bracing Cable & Wire Up to 1/4 in. (25.4 mm) Thick

    FELCO C9 Cable Cutter

    SKU : LCFC9

    $144.35
    The FELCO C9 Cable Cutter, measuring at just over a foot (131/11 in./325mm), is FELCO€™s smallest two-handed wire cutter. It was designed using FELCO€™s €œtriangular cut€ system that allows for a smoother cut without crushing the wire...
    Qty in Cart: 0
    Quantity:
    Price:
    $144.35
    Subtotal:
  • FELCO C7 Cable Cutter | Seismic Bracing Cable & Wire Up to 5/32 in. (3.9 mm) Thick FELCO C7 Cable Cutter | Seismic Bracing Cable & Wire Up to 5/32 in. (3.9 mm) Thick

    FELCO C7 Cable Cutter

    SKU : LCFC7

    $59.95
    The FELCO C7 Cable Cutter, measuring at half a foot (7.5 in. | 190mm), is FELCO€™s smallest wire cutter. It was designed using FELCO€™s €œtriangular cut€ system that allows for a smoother cut without crushing the wire. This feature...
    Qty in Cart: 0
    Quantity:
    Price:
    $59.95
    Subtotal:
  • Loos Seismic Bracing Zinc Sleeves for Gold Cable | Box of 100

    SKU : GO3SLV

    $29.95
    This box of 100 zinc-plated oval sleeves connects Loos & Co. gold seismic bracing cable to itself. These are the only sleeves approved for use with Loos Gold cable. When properly swaged (crimped), the cable connection will exceed the breaking strength of...
    Qty in Cart: 0
    Quantity:
    Price:
    $29.95
    Subtotal:
  • Seismic Bracing Cable | 418 lb. Load (Gold) | 250"≤ (76 m) Spool | Loos Seismic Bracing Seismic Bracing Cable | 418 lb. Load (Gold) | 250"≤ (76 m) Spool | Loos Seismic Bracing

    Loos Seismic Bracing Cable | 418 lb. Load (Gold) | 250 ft. Spool

    SKU : GO3CBL

    $179.95
    This 250 ft. spool of Loos & Co. seismic bracing cable can support loads from 209 to 418 pounds, giving contractors a cost-effective way to satisfy NFPA 13€™s standards for earthquake-resistant hanging of fire sprinkler system piping. Seismic cable...
    Qty in Cart: 0
    Quantity:
    Price:
    $179.95
    Subtotal:
  • Loos & Co. #3-346SB Hand Swager Loos & Co. #3-346SB Hand Swager

    Loos & Co. Hand Swager | #3-346SB

    SKU : 3346SB

    $185.95
    Loos & Co.€™s Locoloc #3-346SB Hand Swager was built to give you years worth of solid performance swaging Loos & Co gold, orange, and green cables. Constructed in Switzerland, and complete with sturdy, rubber handles, this hand swaging tool includes...
    Qty in Cart: 0
    Quantity:
    Price:
    $185.95
    Subtotal:
  • Loos & Co. #0-3-SBHS-R Hand Swager Loos & Co. #0-3-SBHS-R Hand Swager

    Loos & Co. Hand Swager | #0-3-SBHS-R

    SKU : 03SBHS

    $102.95
    Loos & Co.'s Locoloc #0-3-SBHS Hand Swager was built to be the most compact, handheld tool for swaging smaller aluminum and copper sleeves. Constructed in Switzerland, and complete with sturdy, rubber handles, this hand swaging tool includes a Locoloc...
    Qty in Cart: 0
    Quantity:
    Price:
    $102.95
    Subtotal:
  • 3/8 in. (10 mm) Loos & Co. One-Way Anchoring Fitting for Seismic Cable Bracing | Pack of 5 3/8 in. (10 mm) Loos & Co. One-Way Anchoring Fitting for Seismic Cable Bracing | Pack of 5

    Loos & Co. One-Way Retrofit Anchoring Fitting for Seismic Cable Bracing | 3/8 in. | Pack of 5

    SKU : SAFR38-5

    $27.99
    This pack of 5 one-way retrofit anchoring fittings secures Loos & Co. seismic bracing cables to an existing 3/8 in. (10 mm) fastener. With a 3/8 in. fastener mount and one cable mounts, each fastener allows contractors to secure Loos-brand cables...
    Qty in Cart: 0
    Quantity:
    Price:
    $27.99
    Subtotal:
  • Total: items /

Adding your products to cart