4.8-oz Solo A10 Smoke Detector Tester
Solo A10 Smoke Detector Tester sprays synthetic smoke that is ideal for functional tests of smoke detectors. This UL-listed aerosol smoke detector tester may be used by hand (like a can of spray paint) or in tandem with Solo-brand no-climb testing accessories.
This non-flammable smoke detector tester is HFC (hydrofluorocarbon) and silicone-free, minimizing damage to the ozone layer and the environment. It's designed for ease of use, rapid clearing, and compatibility with the plastics found in smoke, heat, and carbon monoxide detectors.
Will this work for my smoke detector?
Solo A10's smoke detector tester spray covers a range of smoke detectors, including:
- Cigarette and oil smoke detectors
- Ionization-type detectors
- Optical detectors
For smoke detectors mounted in hard-to-reach areas, this canister can be used with access and testing equipment from Solo. Their durable extension poles and pole-mounted aerosol sprayers help contractors use these detector testers on ceilings as high as 30 feetno ladder needed.
Solo's product line also includes:
How do I use this smoke detector tester?
Before using this Solo A10 smoke detector tester, read all warnings and instructions labeled on the can. Typical instructions include:
- Shake the canister well.
- Hold the can upright and spray at a distance of 12 in. to 40 in. from the detectoror connect to the Solo 330 or 332 aerosol dispenser.
- Spray only a 1/2 ,‚Äö√¢√†‚àö¬® 1 second burst of aerosol at a time.
- Repeat every 10 seconds (no more than six times) until the detector activates.
What if I want to test or clean other types of detectors?
A variety of testing aerosolsincluding models compatible with Solo-brand equipmentare available: