10-oz Solo C6 CO Detector Tester
Solo C6 Carbon Monoxide (CO) Detector Tester sprays real, non-flammable CO that's ideal for functional tests of CO detectors. This UL-classified aerosol CO detector tester may be used by hand (like a can of spray paint) or in tandem with Solo-brand no-climb testing accessories.
Solo C6 is the only CO tester approved for use with Safe Signal 1224T/A/R CO detectors and Interlogic SpaceAir 250 CO alarms. Tests can be completed in under a minute for each detector.
How do I use this spray with Solo-brand no-climb products?
For CO detectors mounted in hard-to-reach areas, this canister can be used with access and testing equipment from Solo. Their durable extension poles and pole-mounted aerosol sprayers help contractors use these detector testers on ceilings as high as 30 feetno ladder needed. Solo-brand accessories for this product include:
- Solo 100 14-Foot Telescopic Access Pole
- Solo 101 Extender for Telescopic Access Poles
- Solo 108 7.2-Foot Telescopic Access Pole
- Solo 200 Smoke, Heat, and CO Detector Removal Tool
- Solo 330 Aerosol Dispenser (4 in. Diameter)
- Solo 332 Aerosol Dispenser (7 in. Diameter)
Before using this Solo C6 CO detector tester, read all warnings and instructions labeled on the can. Typical instructions include:
- Shake the canister well.
- Hold the can upright and spray at a distance of 12 in. to 40 in. from the detectoror connect to the Solo 330 or 332 aerosol dispenser.
- Spray only a 1/2 to 1 second burst of aerosol at a time.
- Repeat every 10 seconds (no more than six times) until the detector activates.
What if I want to test or clean other types of detectors?
A variety of testing aerosolsincluding models compatible with Solo-brand equipment, are available: