Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.

SKU:
GTMT96

No reviews yet Write a Review
$31.50

Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.

Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.
Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.
Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.
Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.
Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.

  • Buy 6 - 59 and get 3% off
  • Buy 60 or above and get 10% off

Frequently Bought Together:

Grooved Mechanical Tee | Threaded Outlet | 4 in. with 2 in.
Inc. Tax
Ex. Tax
Overview

4 in. Grooved Mechanical Tee with 2 in. FNPT Threaded Outlet secures to pipe to provide a quick and easy mid-point branch outlet in a variety of piping systems, including fire sprinkler systems, plumbing, standpipe systems, and HVAC applications. The threaded opening in this mechanical tee seats over a pre-drilled hole in pipe, forming a water-tight seal with an EPDM rubber gasket.

This UL and FM-approved 4 in. Grooved Mechanical Tee with 2 in. FNPT Threaded Outlet features a ductile iron body conforming to ASTM A536 Grade 65-45-12. Two pairs of carbon steel 300 PSI (2.07 MPa) nuts and bolts facilitate quick installation.

To install this 4 in. Grooved Mechanical Tee with 2 in. FNPT Threaded Outlet, first drill a hole in the pipe, ensuring that a 5/8-inch area around the hole is clear of dirt, rust, and grease. Lubricate the exposed surface of the gasket and place it in the mechanical tee, ensure that the tab in the gasket aligns with the recesses in the house. Then, install the tee over the hole, ensuring that the locating collar engages the outlet hole. Tighten the nuts evenly until the required torque is reached.

Not suitable for petroleum service.

Dimensions

Grooved Fitting Dimensions

  • 0: 5.315 in. (135 mm)
  • D: 4.252 in. (108 mm)
  • H: 3.819 in. (97 mm)
  • K: 3.425 in. (87 mm)
  • L: 6.772 in. (172 mm)
Specifications
Material:
Iron
Pipe Fitting Type:
Mechanical Tee
UL Listed/FM Approved:
No
Data & Resources
Reviews
No reviews yet

Customers Also Viewed

Angle Valve | 1/2 in. Angle Valve | 1/2 in.

Angle Valve | 1/2 in.

SKU : 050AVA

$18.25
Trim or drain with this 1/2 in. (12.7 mm) Angle Valve NPT constructed from durable cast brass. This valve is ready for service in water-based systems, including fire sprinkler systems and standpipes...
Waterflow Detector | Safe Signal | 4 in. Waterflow Detector | Safe Signal | 4 in.

Waterflow Detector | Safe Signal | 4 in.

SKU : WFD4

$209.50
4 in. (101.6 mm) Flow Switch is designed to detect fire sprinkler activations and send an alarm to a fire alarm panel and/or local fire authorities when water flows through fire system piping...