1 1/4" (31.75 mm) Rigid Grooved Coupling
|GGRC125||1 1/4" (31.75 mm)||Ferritic Ductile Cast Iron (ASTM A536 Grade 65-45-12) with EPDM Rubber Gasket||Paint Orange|
|Pipe Outside Diameter||Working Pressure||Bolt Size||Dimensions|
|1.669" (42.4 mm)||500 PSI (3.45 MPa)||M10x45||2.756" (70 mm) Outside Diameter x 4.173" (106 mm) Maximum Width x 1.732" (44 mm) Thick|
|Thermafit Industries Part Number||Availability|
|XGQT001042||Usually Ships Within 48 Hours|
1 1/4" (31.75 mm) Rigid Grooved Coupling forms a water-tight seal between two grooved pipes in fire sprinkler systems, standpipe systems, plumbing, HVAC, and water-based systems. Pipes joined by rigid grooved couplings behave like flanged or welded pipe, but can be installed significantly faster.
This UL and FM-approved 1 1/4" (31.75 mm) Rigid Grooved Coupling features a ductile iron body conforming to ASTM A536 Grade 65-45-12. The gasket is made from EPDM synthetic rubber, recognized as the most water-resistant rubber on the market today. Two pairs of carbon steel M10x45 nuts and bolts facilitate quick installation.
1 1/4" (31.75 mm) Rigid Grooved Coupling features built-in teeth that firmly grasp the pipe ends, facilitating straight pipe lays over short and long distances. Rigid couplings allow less than one degree of deviation from a straight line (angular deflection. This coupling offers a maximum working pressure of 500 PSI (3.4 KPa) depending on pipe diameter and thickness.
- 0: 2.756" (70 mm)
- H: 4.173" (106 mm)
- L: 1.732" (44 mm)