Open End Fire Sprinkler Wrench | Victaulic V27 | 1/2"
- Buy 5 for $68.95 each and save 8%
- Buy 25 for $63.71 each and save 15%
- Buy 50 for $56.21 each and save 25%
|SKU||Construction||Sprinkler Models||Wrench Model|
|SWR50||Black Ductile Iron V27||V27||V27|
|Usually ships within 48 hours|
Victaulic Open End Wrench for 1/2" (12.7 mm) V27 Fire Sprinklers is designed to speed installation or removal of Victaulic model V27 fire sprinklers. Available in painted black, this wrench is made to engage with Victaulic's hex-shaped fire sprinkler frames, which are designed to provide extra flexibility in installing or removing fire sprinklers from various angles.
Sprinkler Identification Numbers (SINs) for compatible Victaulic products include: V2703, V2704, V2707, V2708, V2725, V2726, V2727, & V2728.
Fire Sprinkler Wrench Helpful Tips:
Tip 1: It is recommended that a qualified professional replace fire sprinklers or in any other way modify a fire sprinkler system.
Tip 2: A fire sprinkler's size describes the inner orifice diameter - either half (1/2") or three-quarter (3/4") inch. The outer diamter of a (1/2") sprinkler's threads measures close to three-quarter inch. The other diameter of a (3/4") sprinkler's threads measures close to one inch. Most offices, small retail locations, etc. have (1/2") sprinklers. This applies to ordering wrenches - make sure to get the wrench that fits your size sprinkler.
Tip 3: Spare fire sprinkler heads and a wrench should be accessible at all times in a facility with a commercial fire sprinkler system installed. Often state regulations apply, too. Check with your local fire department.
Tip 4: Fire sprinkler systems should be visually inspected often and professionally inspected annually.