Viking Fire Sprinkler Wrench | XT1 Recessed | 1/2 in. and 3/4 in. Sprinklers | 23560MB

SKU:
VKCSWD
Manufacturer Part Number:
23560MB

No reviews yet Write a Review
$130.75
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B | Top
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B | Angle
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B | Front
Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B | Back

  • Buy 5 - 24 and get 5% off
  • Buy 25 or above and get 10% off

Frequently Bought Together:

Viking XT1 Fire Sprinkler Wrench | Recessed 1/2 in. & 3/4 in. NPT Heads | 20951M/B
Inc. Tax
Ex. Tax

Overview

Viking Sprinkler Head Wrench 23560MB is a specialized fire sprinkler installation tool for use with select square-frame (new style) Viking XT1 fire sprinklers. When paired with a 1/2 in. ratchet (not included), this socket can quickly and safely secure recessed sprinkler heads.

Who needs a fire sprinkler wrench?

Fire sprinkler wrenches allow contractors to install heads easily and without damaging the heads themselves. NFPA 13 also requires building owners to keep anywhere from 6 to 24 spare sprinkler heads on-site, as well as a supply of corresponding sprinkler head wrenches. This requirement ensures that all necessary components are available for the immediate removal and replacement of faulty or activated sprinkler heads.

Is this wrench compatible with my sprinkler head?

Viking Sprinkler Head Wrench provides the leverage needed to install recessed pendent XT1 fire sprinklers, including those with the following sprinkler identification numbers (SINs):

  • VK1021
  • VK2021
  • VK2022
  • VK3021
  • VK3521
  • VK3522

How do I use the sprinkler head wrench?

Always follow the instructions provided in the datasheets for your specific Viking-brand model. In general, installation takes the following steps:

  1. Leave the protective orange cap on the fire sprinkler's frame.
  2. Install the escutcheon inner ring on the sprinkler's threads.
  3. Gently slide the wrench head around the sprinkler's body. Make sure that the wrench head grips the wrench flat, the section of the sprinkler's frame shaped to fit neatly inside the wrench.
  4. Twist the ratchet until finger-tight and secure with an additional 1 to 1 1/2 turns. Ensure that the escutcheon's outer ring contacts the surface of the finished ceiling.

Specifications

Model:
XT1 Recessed Wrench

Reviews

No reviews yet

Customers Also Viewed