Viking Fire Sprinkler Wrench | Coated, Recessed, & Domed ELO Heads | 3/4 in. | 11663W/B

Manufacturer Part Number:

No reviews yet Write a Review
Viking Fire Sprinkler Wrench | Coated
Viking Fire Sprinkler Wrench | Coated
& Domed ELO Heads | 3/4 in. NPT | 11663W/B
Viking Fire Sprinkler Wrench | Coated

  • Buy 5 - 24 and get 5% off
  • Buy 25 or above and get 10% off

Frequently Bought Together:

Viking Fire Sprinkler Wrench | Coated
Inc. Tax
Ex. Tax


Viking Sprinkler Head Wrench 11663W/B is a specialized fire sprinkler installation tool for use with select Viking Microfast Model M ELO (extra large orifice) fire sprinklers. When paired with a 1/2 in. ratchet (not included), this socket can quickly and safely secure wax-coated, recessed, and domed concealed heads.

Who needs a fire sprinkler wrench?

Fire sprinkler wrenches allow contractors to install heads easily and without damaging the heads themselves. NFPA 13 also requires building owners to keep anywhere from 6 to 24 spare sprinkler heads on-site, as well as a supply of corresponding sprinkler head wrenches. Adhering to this requirement ensures that all necessary components are ready and available for the immediate removal and replacement of faulty or activated sprinkler heads.

Is this wrench compatible with my sprinkler head?

Viking Sprinkler Head Wrench provides the leverage needed to install wax-coated, domed concealed, or recessed ELO fire sprinklers, including those with the following sprinkler identification numbers (SINs):

  • VK534
  • VK537
  • VK608
  • VK617

How do I use the sprinkler head wrench?

Wax-coated, recessed, and domed concealed fire sprinklers each install differently. Follow the instructions provided in the datasheets for your specific Viking-brand model. In general, installation takes the following steps:

  1. Leave the protective orange shield on the fire sprinkler's deflector.
  2. Gently slide the wrench head around the sprinkler's body. Make sure that the wrench head grips the wrench flats the section of the sprinkler's frame shaped to fit neatly inside the wrench.
  3. Twist the ratchet until finger-tight and secure with an additional 1 to 1 1/2 turns.

Microfast is a registered trademark of The Viking Corporation



No reviews yet

Customers Also Viewed