Preparing for a fire inspection? Avoid common citations using our FREE inspection checklist.

Viking Sprinkler Head Wrench | Domed Concealed, Recessed, & Wax-Coated | 1/2″ & 3/4″ NPT | 13577W/B

SKU
VKCSW2
Viking Sprinkler Head Wrench makes it easy to install select Viking-brand wax-coated, recessed, and domed concealed pendent fire sprinklers. Compatible with a variety of models, the #13577W/B socket minimizes slippage and rotates fire sprinklers using a 1/2″ ratchet (not included).
$115.95
SKU Material Viking Part Number
VKCSW2 Black-Finished Metal 13577W/B
Compatible Sprinklers Availability
See List Below Usually Ships Within 48 Hours

Viking Sprinkler Head Wrench for Wax-Coated, Recessed, and Domed Concealed Fire Sprinklers (13577W/B)

Viking Sprinkler Head Wrench 13577W/B is a specialized fire sprinkler installation tool for use with select Viking upright and pendent sprinkler heads. When paired with a 1/2″ ratchet (not included), this socket can quickly and safely secure more than 20 commercial and residential fire sprinklers, including select:

  • Wax-coated 1/2″ & 3/4″ NPT commercial pendent heads
  • Wax-coated 1/2″ & 3/4″  NPT commercial upright heads
  • Commercial recessed pendent heads
  • Residential domed concealed pendent heads

Who needs a fire sprinkler wrench?

Fire sprinkler wrenches allow contractors to install heads easily—and without damaging the heads themselves. NFPA 13 also requires building owners to keep anywhere from 6 to 24 spare sprinkler heads on-site, as well as a supply of corresponding sprinkler head wrenches. Adhering to this requirement ensures that all necessary components are ready and available for the immediate removal and replacement of faulty or activated sprinkler heads.

Is this wrench compatible with my sprinkler head?

Viking Sprinkler Head Wrench provides the leverage needed to install wax-coated, recessed, or domed concealed residential and commercial concealed sprinklers, including those with the following sprinkler identification numbers (SINs):

  • VK100
  • VK102
  • VK104
  • VK106
  • VK108
  • VK110
  • VK118
  • VK120
  • VK122
  • VK200
  • VK202
  • VK204
  • VK206
  • VK458
  • VK458-D
  • VK466-D
  • VK468
  • VK468-D
  • VK600
  • VK602
  • VK609
  • VK610
  • VK611
  • VK613

How do I use the sprinkler head wrench?

Wax-coated, recessed, and domed concealed fire sprinklers each install differently. Follow the instructions provided in the datasheets for your specific Viking-brand model. In general, installation takes the following steps:

  1. Remove the protective cap from the sprinkler head.
  2. Gently slide the wrench head around the sprinkler’s body. Make sure that the wrench head grips the “wrench flats”—the section of the sprinkler’s frame shaped to fit neatly inside the wrench.
  3. Twist the ratchet until the sprinkler head is firmly attached to the piping.
Write Your Own Review
You're reviewing:Viking Sprinkler Head Wrench | Domed Concealed, Recessed, & Wax-Coated | 1/2″ & 3/4″ NPT | 13577W/B
Your Rating